16005 2.4 GHz 0 dBd Omnidirectional 1/2 Wave Whip Antenna
Features an Articulating Knuckle Joint
weather applications water applications energy applications gas flux & turbulence applications infrastructure applications soil applications


The 16005 is a unity gain (0 dBd), 1/2 wave whip, omnidrectional antenna that can be used with our 2.4 GHz radio products with RPSMA antenna connectors. It features an articulating knuckle joint for easy orientation, weatherized jacket for outdoor applications, and internal counterpoise for ground plane independence.

Read More


Detailed Description

The 16005 attaches directly to a 2.4 GHz spread spectrum transceiver; an antenna cable is not needed. It has a right-angle knuckle joint that can be oriented vertically or at right angles.


FCC Part 15 Compliant Type 1/2 wave, dipole with articulating base
Connector Reverse Polarity SMA (RPSMA) female
Center Frequency 2.4 GHz
Bandwidth 120 MHz
Wavelength 1/2 wave
VSWR < 1.9 typical (at center frequency)
Impedance 50 ohm
Diameter 1.0 cm (0.4 in.) at base
Length 11.5 cm (4.5 in.)
Weight 11.0 g (0.4 oz)


The 16005 connects to transcievers that have a reverse polarity SMA (RPSMA) connector. Campbell Scientific offers spread spectrum radios, CR200(X)-series dataloggers, AVW200-series interfaces, and Wi-Fi network links that have this connector.

Contemporary Devices

Spread-Spectrum Radios

RF401 RF411 RF416 RF430 RF431 RF432 RF450

CR6-Series Dataloggers


CR200X-Series Dataloggers

CR200X CR206X CR211X CR216X

AVW200-series Vibrating-Wire Interfaces

AVW200 AVW206 AVW211 AVW216

Wi-Fi Network Link


Retired Devices

Spread-Spectrum Radios

RF400 RF410 RF415 FGR-115RC FGR-115RE

CR200-Series Dataloggers

CR200 CR205 CR210 CR215 CR206 CR211 CR216