RETIRED ›
This product is no longer available and has been replaced by: RF416. Some accessories, replacement parts, or services may still be available.
Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Other Accessories

31312
 
Commonly used with RF407-series or RF451 radio devices, the 31312 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna or antenna coaxial cable with a Type N connector.
31314
 
The 31314 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.

Replacement Parts

15966
 
A 15966 wall charger is required for ac power to serve as the power source for the RF415. This ac/dc transformer accepts inputs from 90 to 260 Vac @ 47 to 63 Hz, then outputs 12 Vdc @ 880 mA for use by the RF415. The 15966 is fitted with a cable and barrel plug to connect the transformer to the RF415; cable length is 6 ft.
14291
 
The 14291 power cable allows the RF415 to be powered from a suitable 12 Vdc power supply.
14162
 
The 14162 kit attaches the radio to the backplate of an environmental enclosure.
16755
 
The 16755 is a high-gain (13 dBd), directional (Yagi) antenna that has a narrow beam width, so precise aiming is mandatory. It is useful for longer distances, and when only communicating with one other station (due to narrow beam width). This antenna requires an antenna cable to connect it to the RF415. The antenna is suitable for outdoor use.
16005
 
The 16005 is a unity gain (0 dBd), 1/2 wave whip, omnidirectional antenna. Its articulating knuckle joint can be oriented vertically or at right angles. This antenna attaches directly to the radio; a cable is not required. The 16005 must reside inside a building or enclosure.
17480
 
The 17480 is an omnidirectional antenna with a 1 dBd gain. It has adhesive backing that adheres to a wall, rear-view mirror, window, or another suitable flat, non-conductive surface. This antenna includes a 10-ft cable that attaches to the RF415.
COAXRPSMA-L
 
COAXRPSMA-L Antenna Cable LMR195 w/Reverse Polarity SMA & Type N Male Connector
 
Either this cable or the COAXNTN-L (see below) is required when using the 16755 antenna. The COAXRPSMA-L is an LMR195 cable that terminates in a type N male connector on the "antenna end" and a Reverse Polarity SMA (RPSMA) connector on the "transceiver end." This cable is recommended for applications where the cable length is less than 10 feet.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

Recommended length is 5 ft (1.5 m). Maximum length is 10 ft (3 m).
COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
Either this cable or the COAXRPSMA-L (see above) is required when using the 16755 antenna. The COAXNTN-L is a low-loss RG8 coaxial cable that requires the 31314 surge protection kit to connect it to the RF415. The COAXNTN-L/31314 combination is recommended over the COAXRPSMA-L when the antenna cable will be longer than 10 ft (as measured between the RF416 and the antenna) or when the RF415 will be used in an environment susceptible to lightning or electrostatic buildup.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
21212
 
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.
18663
 
The 18663 is a null modem cable used to connect the RF415 radio to a datalogger's RS-232 port.
10873
 
The 10873 is a serial cable that is useful for connecting the RS-232 port of the datalogger to the 9-pin RS-232 port of a computer. The cable is six feet long.

Services

 
The 18206 service specifies a minor upgrade of an RF415 spread spectrum radio to an RF416 radio; an RMA is required. The critical factor in determining whether a major versus minor upgrade is required depends on the version of Maxstream code within the radio. For radios with version 4.28D or later, a minor upgrade will suffice. Radios of this version were shipped intermittently in 2003, consistently by 2004.
 
The 18207 service specifies a major upgrade of an RF415 spread spectrum radio to an RF416 radio; an RMA is required. The critical factor in determining whether a major versus minor upgrade is required depends on the version of Maxstream code within the radio. For radios with version 4.28D or later, a minor upgrade will suffice. Radios of this version were shipped intermittently in 2003, consistently by 2004.