GSA contract holder

At Campbell Scientific, Inc., we design, produce, distribute, and support our products, which are used to create measurement systems for a variety of applications. Relying on our specialized engineers with degrees in scientific and engineering disciplines, and our highly qualified technical support staff, we have the full-time, professional personnel to configure and support the systems that address your specific instrumentation needs. Together we work to fulfill our mission of unprecedented quality and excellence.

We have achieved high satisfaction performance ratings on projects with federal, state, and local governments, as well as with private sector clients. Because of our proven record of producing quality work products within budget and on schedule, many of our clients continue to contract with Campbell Scientific, Inc. Our high-quality, rugged, precise, and dependable instruments, backed by our specialized support, have enabled us to meet the instrumentation needs of our clients for more than 40 years.

Visit GSA Advantage!™ www.gsaadvantage.gov.

GENERAL SERVICES ADMINISTRATION INFORMATION
FSC Group 6660, Part II, Section "Q"
SCHEDULE TITLE Scientific Equipment and Services
FSC Group: 6660
SIN (Special Item Number) 66-612
CONTRACT NUMBER GS-07F-9255S
CONTRACT PERIOD December 1, 2015 to November 30, 2020
CONTRACTOR

Campbell Scientific, Inc.
815 West 1800 North
Logan, UT 84321
www.campbellsci.com
gsa@campbellsci.com

Sales:
Ph (435) 227-9120

Support:
Ph (435) 227-9100

General Fax:
(435) 227-9001

Order Placement:
Ph (435) 227-9021
Fax (435) 227-9091
orders@campbellsci.com

BUSINESS SIZE Small Business
CUSTOMER INFORMATION
1a. TABLE OF AWARDED SPECIAL ITEM NUMBERS (SINs) 66-612 Environmental Data Loggers And Communication Equipment
1b. LOWEST PRICED MODEL NUMBER AND PRICE FOR EACH SIN SIN: 66-612
MODEL: 25366
PRICE: $17.00

1c.
HOURLY RATES (Services Only)  N/A
2. MAXIMUM ORDER*  $150,000.00

*If the best value selection places your order over the Maximum Order identified in this catalog/pricelist, you have an opportunity to obtain a better schedule contract price. Before placing your order, contact the aforementioned contractor for a better price. The contractor may (1) offer a new price for this requirement, (2) offer the lowest price available under this contract, or (3) decline the order. A delivery order that exceeds the maximum order may be placed under the schedule contract in accordance with FAR 8.404.
3. MINIMUM ORDER  None
4. GEOGRAPHIC COVERAGE Domestic, 50 states, Washington, DC, Puerto Rico, US Territories and to a CONUS port or consolidation point for orders received from overseas activities or give details as negotiated
5. POINT(S) OF PRODUCTION USA
6. DISCOUNT FROM LIST PRICES GSA Net Prices are shown on GSA Advantage. Negotiated discount has been applied and the IFF has been added.
7. QUANTITY DISCOUNT(S) 10-24 units 7%, 25-MO units 10% (from Retail List)
8. PROMPT PAYMENT TERMS Net 30 Information for Ordering Offices: Prompt payment terms cannot be negotiated out of the contractual agreement in exchange for other concessions.
9a. GOVERNMENT COMMERCIAL CREDIT CARD ACCEPTANCE Government Purchase Cards must be accepted at or below the micro-purchase threshold.
9b. DISCOUNT FOR PAYMENT BY GOVERNMENT
COMMERCIAL CREDIT CARD
Government Purchase Cards are accepted above the micro-purchase threshold. Contact contractor for limit.
10. FOREIGN ITEMS None
11a TIME OF DELIVERY Shipped 30 Days after receipt of order
11b. EXPEDITED DELIVERY Call basis
11c. OVERNIGHT AND 2-DAY DELIVERY If available, contact the Contractor for rates.
11d. URGENT REQUIREMENTS Customers are encouraged to contact the contractor for the purpose of requesting accelerated delivery.
12. FOB POINT Destination to 48 contiguous states and Washington, DC
13a. ORDERING ADDRESS Same as contractor
13b. ORDERING PROCEDURES For supplies and services, the ordering procedures, information on Blanket Purchase Agreements (BPA’s) are found in FAR 8.405-3
14. PAYMENT ADDRESS Same as contractor
15. WARRANTY PROVISION Standard Commercial Warranty. Customer should contact contractor for a copy of the warranty.

Limited Warranty
: Products manufactured by CSI are warranted by CSI to be free from defects in materials and workmanship under normal use and service for twelve months from the date of shipment unless otherwise specified in the corresponding product manual. (Product manuals are available for review online at www.campbellsci.com.) Products not manufactured by CSI, but that are resold by CSI, are warranted only to the limits extended by the original manufacturer. Batteries, fine-wire thermocouples, desiccant, and other consumables have no warranty. CSI's obligation under this warranty is limited to repairing or replacing (at CSI's option) defective Products, which shall be the sole and exclusive remedy under this warranty. The Customer assumes all costs of removing, reinstalling, and shipping defective Products to CSI. CSI will return such Products by surface carrier prepaid within the continental United States of America. To all other locations, CSI will return such Products best way CIP (port of entry) per Incoterms® 2010. This warranty shall not apply to any Products which have been subjected to modification, misuse, neglect, improper service, accidents of nature, or shipping damage. This warranty is in lieu of all other warranties, expressed or implied. The warranty for installation services performed by CSI such as programming to customer specifications, electrical connections to Products manufactured by CSI, and Product specific training, is part of CSI's product warranty. CSI EXPRESSLY DISCLAIMS AND EXCLUDES ANY IMPLIED WARRANTIES OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE. CSI hereby disclaims, to the fullest extent allowed by applicable law, any and all warranties and conditions with respect to the Products, whether express, implied or statutory, other than those expressly provided herein.

Restocks/Returns: With some exceptions, unused Products may be returned within sixty days of purchase with prior authorization (RMA) by the factory. Returned Products must be suitable for resale as new. A 15% restock fee will be charged ($75.00 minimum) on all returns. Credit will be given only to the billing party on the invoice. Credit will not be given for cables or tubing cut to Customer-specified lengths, or for services performed on Products, such as extended temperature testing.

Products that may not be returned include, but are not necessarily limited to, the following: cellular transceivers, antenna cables, software,consumables, services, obsolete Products, specially modified versions of standard hardware, Products not available for purchase from CSI price lists or on CSI's website, and Products that are otherwise designated as non-returnable or non-restockable.

16. EXPORT PACKING CHARGES N/A
17. TERMS AND CONDITIONS OF GOVERNMENT PURCHASE CARD ACCEPTANCE (any thresholds above the micro-purchase level may be inserted by contractor)
18. TERMS AND CONDITIONS OF RENTAL, MAINTENANCE, AND REPAIR N/A
19. TERMS AND CONDITIONS OF INSTALLATION N/A
20. TERMS AND CONDITIONS OF REPAIR PARTS INDICATING DATE OF PARTS PRICE LISTS AND ANY DISCOUNTS FROM LIST PRICES N/A
20a. TERMS AND CONDITIONS FOR ANY OTHER SERVICES N/A
21. LIST OF SERVICE AND DISTRIBUTION POINTS N/A
22. LIST OF PARTICIPATING DEALERS N/A
23. PREVENTATIVE MAINTENANCE N/A
24a. SPECIAL ATTRIBUTES SUCH AS ENVIRONMENTAL ATTRIBUTES N/A
24b. SECTION 508 COMPLIANCE FOR EIT as applicable
25. DUNS NUMBER 06-798-0730
26. NOTIFICATION REGARDING REGISTRATION IN SYSTEM FOR AWARD MANAGEMENT (SAM) DATABASE Contractor has an Active Registration in the SAM database.