Product Details
Typically Ships Within 7 - 14 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 10873 Serial Data Cable, 9-Pin Female to 9-Pin Male
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw
(1) 19246 Power Cable, AVW200-Series to Datalogger

Purchase of this product is not recommended for new networks to be deployed in the European Union (EU) that may require future expansion. This and other RF-compatible products will not be available for sale in Europe after 01 Jan 2015 due to changes in EU legislation.

Common Accessories

16755
 
The AVW216 requires the purchase of an antenna. Several antennas are offered. The 16755 is a high-gain (13 dBd), directional (Yagi) antenna that has a narrow beam width, so precise aiming is mandatory. It is useful for longer distances, and when only communicating with one other station (due to narrow beam width). This antenna requires an antenna cable to connect it to the AVW216. The antenna is suitable for outdoor use.
16005
 
The AVW216 requires the purchase of an antenna. Several antennas are offered. The 16005 is a unity gain (0 dBd), 1/2 wave whip, omnidirectional antenna. Its articulating knuckle joint can be oriented vertically or at right angles. This antenna attaches directly to the radio; a cable is not required. The 16005 must reside inside a building or enclosure.
17480
 
The AVW216 requires the purchase of an antenna. Several antennas are offered. The 17480 is an omnidirectional antenna with a 1 dBd gain. It has adhesive backing that adheres to a wall, rear-view mirror, window, or another suitable flat, non-conductive surface. This antenna includes a 10-ft cable that attaches to the AVW216.
30411
 
The 30411 is a higher gain (5.8 dBd) omnidirectional antenna. It is suitable for base station use where you need to communicate with multiple stations located in different directions. The antenna has a TYPE N female connector and requires an antenna cable to connect it to the radio. It does not include mounting hardware, and is typically mounted with the 13906 (see below).
13906
 
The 13906 provides hardware for mounting the 30411 antenna (see above).
COAXRPSMA-L
 
COAXRPSMA-L Antenna Cable LMR195 w/Reverse Polarity SMA & Type N Male Connector
 
Either this cable or the COAXNTN-L (see below) is required when using the 16755 or 30411 antenna. The COAXRPSMA-L is an LMR 195 cable that terminates in a type N Male connector on the "antenna end" and a Reverse Polarity SMA (RPSMA) connector on the "transceiver end." This cable is recommended for applications where the cable length is less than 10 feet.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

Recommended length is 5 ft (1.5 m). Maximum length is 10 ft (3 m).
COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
Either this cable or the COAXRPSMA-L (see above) is required when using the 16755 or 30411 antenna. The COAXNTN-L is a low-loss RG8 coaxial cable that requires the 31314 surge protection kit to connect it to the AVW216. The COAXNTN-L/31314 combination is recommended over the COAXRPSMA-L when the antenna cable is longer than 10 feet (as measured between the transceiver and the antenna) or when the AVW216 is used in an environment susceptible to lightning or electrostatic buildup.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
31314
 
The 31314 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
21212
 
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.

Other Accessories

17855
 
One end of this cable is fitted with a 9-pin connector, and the other end terminates in pigtails. The 17855 is used to connect the AVW216's RS-232 port to a pair of control ports on a CR800, CR850, CR1000, or CR3000.
18663
 
This 1-ft, null modem cable has 9-pin connectors on both ends. The 18663 can connect the AVW216's RS-232 port to the datalogger's RS-232 port.
 
CABLE3CBL-L 3-Conductor 22AWG Cable w/Drain
 
The CABLE3CBL-L is recommended to connect the AVW216 to a datalogger when SDI-12 is used. This 22-AWG, three-conductor cable has a Santoprene jacket and an aluminum Mylar shield.
CABLE3CBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.
31312
 
Commonly used with RF407-series or RF451 radio devices, the 31312 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna or antenna coaxial cable with a Type N connector.
19335
 
The 19335 is a factory-installed bulkhead-mounted coaxial cable. The associated enclosure on your order is properly cut to fit the Type N bulkhead connector, and the cable is installed prior to shipment. The cable has a Type N Female bulkhead connector on one end and an RPSMA plug (male) connector on the other. The cable is 17 in. (43.2 cm) of low-loss LMR-195.

Replacement Parts

3768
 
This green, plug-in power connector is shipped attached to the AVW216. The 3768 provides screw terminals for connecting the 12V and GND wires of the 19246 power cable. The other end of the 19246 power cable connects to the 12V and G terminals of a datalogger or power supply.
20581
 
The 20581 provides screw terminals for connecting the sensor(s) and multiplexer(s) to the AVW216. This green, plug-in connector may be purchased to have a spare terminal strip or as a replacement item if the strip has been lost or damaged.
 
This power cable is used to connect the 12V and G terminals of a datalogger or power supply. The 19246 is shipped with the AVW216 and available as a replacement part.
10873
 
This RS-232 cable connects the AVW216 to a PC. The AVW216 is connected to a PC during configuration and troubleshooting. The 10873 is shipped with the AVW216 and available as a replacement part.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.