The COAXRPSMA-L is an LMR195 coaxial cable fitted with a Type N Male connector on one end and a Reverse Polarity SMA (RPSMA) male connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a spread-spectrum radio with an RPSMA connector.Read More
The "-L" on a product model indicates that the cable length is specified at the time of order.
The COAXRPSMA-L is an LMR195 coaxial cable fitted with a Type N male connector on one end and a Reverse Polarity SMA (RPSMA) male connector on the other end. The cable has a UV-resistant polyethylene jacket, which with proper installation and care, is designed for 20 years of outdoor use.
The COAXRPSMA-L is recommended for cable lengths less than 10 ft. If the cable needs to be longer, the COAXNTN coaxial cable and a surge suppressor kit are recommended.
|Connector 1||Type N male plug|
|Connector 2||Reverse Polarity SMA (RPSMA) male plug|
|Bend Radius||1.27 cm (0.5 in.)|
|Operating Temperature Range||-40° to +85°C|
|Weight||0.03 kg/m (0.021 lb/ft)|
The COAXPRSMA-L is compatible with any device requiring a Type N to RPSMA cable with an impedance of 50 ohm. The COAXRPSMA-L is often used with the NL240, CWB100, CR200-series, AVW200-series, CRVW3, and the following series of Campbell Scientific spread-spectrum radios: RF400, RF401, RF401A, RF407, RF412, RF422, and RF430.