RETIRED ›
This product is no longer available and has been replaced by: CR216X. Some accessories, replacement parts, or services may still be available.
Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty 3 years
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Other Accessories

ENC200
 
The ENC200 enclosure can house one CR216 datalogger and the 16869 Sealed Rechargeable Battery. Five compression fittings are provided for sensor cable entry; there are also specialized connectors for a solar panel, antenna, and system ground.
15725
 
The 15725 provides a CD-ROM containing software for updating the CR211 to the latest operating system. This software is also available on our website for download.
16869
 
This compact, sealed rechargeable, 12 V battery is optimized for use with a CR200-series datalogger and the ENC200 Enclosure. The 16869 has an 0.8 Ahr (800 mAhr) capacity.
17394
 
One end of the 17394 cable attaches to a USB port on a computer, and the other end of the cable attaches to the data logger's RS-232 port.
16876
 
This wall charger recharges the #16869 12 V, 0.8 Ahr battery via ac power. The 16876 plugs into the ENC200's power connector.
BP7
 
The 17365 offers a much larger capacity battery (7 Ahrs) than the 16869 battery. Use of the 17365 requires a larger enclosure such as the ENC10/12 or ENC12/14; the ENC200 is NOT compatible.
16867
 
The 16867 attaches to the battery terminals on a CR216 logger. Power supplies such as the PS150, BP12, and BP24 plug into this connector allowing them to power the logger.
15988
 
The 15988 recharges the #17365 12 V, 7 Ahr battery via ac power. Its cable terminates in pigtails for attachment to the data logger's terminal strip.
16755
 
Three antennas are offered. The 16755 is a high-gain (13 dBd), directional (Yagi) antenna that has a narrow beam width, so precise aiming is mandatory. It is useful for longer distances, and when only communicating with one other station (due to narrow beam width). This antenna requires an antenna cable to connect it to the CR216. The antenna is suitable for outdoor use.
16005
 
Three antennas are offered. The 16005 is a unity gain (0 dBd), 1/2 wave whip, omnidirectional antenna. Its articulating knuckle joint can be oriented vertically or at right angles. This antenna attaches directly to the CR216; a cable is not required. The 16005 must reside inside a building or enclosure.
17480
 
Three antennas are offered. The 17480 is an omnidirectional antenna with a 1 dBd gain. It has adhesive backing that adheres to a wall, rear-view mirror, window, or another suitable flat, non-conductive surface. This antenna includes a 10-ft cable that attaches to the CR216.
COAXRPSMA-L
 
COAXRPSMA-L Antenna Cable LMR195 w/Reverse Polarity SMA & Type N Male Connector
 
Either this cable or the COAXNTN-L (see below) is required when using the 16755 antenna. The COAXRPSMA-L is an LMR195 cable that terminates in a type N male connector on the "antenna end" and a Reverse Polarity SMA (RPSMA) connector on the "transceiver end." This cable is recommended for applications where the cable length is less than 10 feet.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

Recommended length is 5 ft (1.5 m). Maximum length is 10 ft (3 m).
COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
Either this cable or the COAXRPSMA-L (see above) is required when using the 16755 antenna. The COAXNTN-L is a low-loss RG8 coaxial cable that requires the 31314 surge protection kit to connect it to the CR216. The COAXNTN-L/31314 combination is recommended over the COAXRPSMA-L when the antenna cable will be longer than 10 ft (as measured between the RF416 and the antenna) or when the CR216 will be used in an environment susceptible to lightning or electrostatic buildup.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
21212
 
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.
31312
 
Commonly used with RF407-series or RF451 radio devices, the 31312 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna or antenna coaxial cable with a Type N connector.
31314
 
The 31314 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
27373
 
The 27373 facilitates connecting multiple wires into the same terminal, such as for SDI-12.

Replacement Parts

15598
 
The 15598 powers the clock and SRAM when the primary 12 Vdc power supply is not connected. This 3 V lithium coin cell battery needs to be periodically replaced. Campbell Scientific recommends replacing the battery every five years.
1113
 
The 1113 is used to attach sensor leads to screw terminals.
10873
 
The 10873 is a serial cable that is useful for connecting the RS-232 port of the data logger to the 9-pin RS-232 port of a computer. The cable is six feet long.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.

Services

 
The 27307 is a service for upgrading a CR216 datalogger to a CR216X. Customers with a CR216 datalogger that has a serial number of 4133 or lower will also need to purchase the 19345 4M Memory Upgrade (see below).
 
The 19345 allows the 1 MBit Flash chip used in older CR216 loggers (serial number 4133 or lower) to be replaced with the 4 MBit Flash chip.