CR310
 
CR310 Datalogger (-40 to +70C)
 
Communication Options - show details
-NA -NA No Additional Coms
Comes with the standard communication methods only (USB, RS-232, etc.).
-WIFI -WiFi w/Wireless Modem
Offers built-in Wi-Fi capability, making it ideal for short-range, wireless IP communications. This option includes a 16005 2.4 GHz 0 dBd Omnidirectional 1/2 Wave Whip Antenna.
-RF407 -RF407 w/900MHz Radio
Offers built-in 900 MHz spread-spectrum radio. This model is best suited for applications in the USA and Canada.
-RF412 -RF412 w/920MHz Radio
Offers built-in 922 MHz spread-spectrum radio. This model is best suited for applications in Australia and New Zealand.
-RF422 -RF422 w/868MHz Radio
Offers built-in 868 MHz spread-spectrum radio. This model is best suited for applications in Europe.
-CELL200 -CELL200 w/3G GSM
The -CELL200 option is not compatible with a Verizon cellular network.

Offers built-in 3G GSM cellular modem.
-CELL205 -CELL205 w/4G LTE CAT1
The -CELL205 option is intended for use in Canada, Mexico, and the United States. This option offers 4G LTE cellular modem technology with 3G fallback.
-CELL200 Data Provisioning Option - show details
  -ND -ND No Data Provisioning
  -IT1A -IT1A International 1A
Confirm the modem compliance for the country/carrier where the services are needed.
  -IT1B -IT1B International 1B
Confirm the modem compliance for the country/carrier where the services are needed.
-CELL205 Data Provisioning Option
  -ND -ND No Data Provisioning
  -AT -AT AT&T North America
  -TM -TM T-Mobile US

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 3 years
Compliance CE Compliance Image RoHS Compliance Image

Note: The following CR310 options are RoHS but not CE compliant: -RF407 and
-RF412.

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) Certificate of Calibration
(1) 32361 QuickStart URL Card
(3) 505 Screw #6-32 x .375 Pan Phillips
(3) 6044 Grommet for #6 or 8 Screw
(1) 27555 USB 2.0 Cable, Type A Male to Micro B Male, 6/6.5 ft
(1) 1113 Flat-Bladed Screwdriver, 3.0 mm Blade x 60 mm Shaft
(1) 3315 Type T Thermocouple
(1) 16005 2.4 GHz 0 dBd Omnidirectional ½ Wave Whip Antenna (-WIFI option only)

For information about available cellular data services, visit our Cellular Data Services page.


Additional Common Accessories, applicable to the various radio options, can be found on the Ordering Info pages of the associated radios: RF407, RF412, and RF422

Common Accessories

 
CELLDATA Campbell Scientific Cellular Data Service Subscription
 
CELLDATA must be ordered if also ordering a data provisioning option.
Coverage Option
-V -V Verizon US
-AT -AT AT&T North America
-TM -TM T-Mobile US
-IT1A -IT1A International 1A
-IT1B -IT1B International 1B
-V Data Plan Size
  -A25 -A25 25MB/Mon for 1 Yr
  -A250 -A250 250MB/Mon for 1 Yr
  -A1G -A1G 1G/Mon for 1 Yr
  -A5G -A5G 5G/Mon for 1 Yr
Data Plan Size
  -A25 -A25 25MB/Mon for 1 Yr
  -A250 -A250 250MB/Mon for 1 Yr
  -A1G -A1G 1G/Mon for 1 Yr
  -A5G -A5G 5G/Mon for 1 Yr
-AT Data Plan Size
  -A25 -A25 25MB/Mon for 1 Yr
  -A250 -A250 250MB/Mon for 1 Yr
  -A1G -A1G 1G/Mon for 1 Yr
  -A5G -A5G 5G/Mon for 1 Yr
-TM Data Plan Size
  -A25 -A25 25MB/Mon for 1 Yr
  -A250 -A250 250MB/Mon for 1 Yr
  -A1G -A1G 1G/Mon for 1 Yr
  -A5G -A5G 5G/Mon for 1 Yr
-IT1A Data Plan Size
  -A25 -A25 25MB/Mon for 1 Yr
  -A250 -A250 250MB/Mon for 1 Yr
-IT1B Data Plan Size
  -A25 -A25 25MB/Mon for 1 Yr
18663
 
This cable is most commonly used to connect a communication peripheral, such as a cellular gateway or radio, to the datalogger’s 9-pin RS-232 port. This 1 ft, null modem cable has 9-pin male connectors on both ends for connecting the datalogger to another DCE serial device.
ENC8/10
 
ENC8/10 Weather-Resistant 8 x 10 inch Enclosure
 
The ENC8/10 is a weather-resistant enclosure that is 8 inches wide and 10 inches tall. It is the smallest of our standard enclosures, yet it is extra deep with a depth of 6 inches. This enclosure is suitable for use with CR310 dataloggers. The ENC8/10 can house one of these dataloggers and a small power supply.
Enclosure Hole Options
-SC -SC 1 Conduit for Cables
-ES -ES 6 Entry Seals for Cab
-NC -NC No Conduit/Entry Seal
Enclosure Mounts
-NM -NM No Enclosure Mounting
-MM -MM Enclosure Mounting
ALK7
 
The ALK7 is suitable for powering the datalogger through the BAT input when used in low-current-drain systems that can be visited periodically so the batteries can be replaced. The ALK7 is not rechargeable and damage could occur if a solar panel or power supply is connected to the CHG input on the datalogger at the same time.

Note: The ALK7 does not ship with the required 8 D cell batteries. The batteries must be ordered separately or supplied by the user.
BP7
 
The BP7 is a rechargeable, 12V, 7 Ah battery suitable for low-current-drain systems and systems that will use a solar panel or power supply connected to the CHG input of the datalogger. This battery is typically recharged with a panel or wall charger.
29796
 
29796 Power Supply 24Vdc 1.67A Output, 100-240Vac 1A Input, 5ft Cable
 
The 29796 converts 100 to 240 Vac to a regulated 24 Vdc. The 29796 comes standard with a USA/Canada plug, with an option to add a kit for international use.
Power Cable Options
-US -US US & Canada Plug
-IP -IP 7 International Plugs
28899
 
The 28899 is a 2 ft, unshielded CAT6 network cable with RJ45 connectors. This cable is used for completing an Ethernet connection.
28900
 
The 28900 is a 10 ft, unshielded, CAT5e network cable with RJ45 connectors. This cable is used for completing an Ethernet connection.
30411
 
The 30411 is one antenna option for use with Wi-Fi. The 30411 is a 5.8 dBd omnidirectional antenna for use with our 2.4 GHz spread-spectrum products. The 30411 is suitable for base-station use where communication is needed with multiple stations located in different directions. It is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line of sight. Mounting hardware is not included.
16755
 
The 16755 is one antenna option suitable for use with Wi-Fi. The 16755 is a high-gain (13 dBd), directional (Yagi) antenna used with our 2.4 GHz radio transceivers. It is intended for longer distances, and for communicating to one other station (due to narrow beam width).
15730
 
This antenna is suitable for use with the -RF and -WIFI options.

One of three antenna options for use with 900 MHz radios.The 15730 is a 900 MHz, unity gain (0 dBd), 1/4 wave whip, right-angle antenna. The 15730 is an omnidirectional antenna that attaches directly to the product (no cables). It should be used inside an enclosure or building.
14201
 
One of three antenna options for use with 900 MHz radios. The 14201 is a high-gain (9 dBd), directional (Yagi) antenna. It is useful for making RF links over longer distances in one direction. This antenna is typically used with sub-315 mW radios such as the RF407. The 14201 requires an antenna cable to connect it to the spread-spectrum transceiver.
14221
 
One of three antenna options for use with 900 MHz radios. The 14221 is a 3 dBd omnidirectional antenna. The 14221 is suitable for base station use where you need to communicate with multiple stations located in different directions. It is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line-of-sight.
32256
 
This antenna is suitable for use with the -CELL options.

One of three antenna options is needed for the -CELL options: 32256, 32262, or 31128.

The 32256 is a wide-band termination antenna with an SMA connector and articulating base. It has a high-efficiency response on nearly all 4G, 3G, and 2G frequency bands. This small, low-cost antenna is typically used in applications where antenna gain is not required to maintain a strong cellular link.
32262
 
This antenna is suitable for use with the -CELL options.

One of three antenna options is needed for the -CELL options: 32256, 32262, or 31128.

The 32262 is an omnidirectional antenna with mounting bracket that is ideally suited for use with 4G and 3G cellular devices. The mounting bracket attaches to a mast or crossarm, and it serves as the antenna ground plane. The antenna has an N type (female) threaded permanent stud for easy mounting to the included bracket or through an enclosure wall. An antenna cable, purchased separately, is required.
31128
 
This antenna is suitable for use with the -CELL options.

One of three antenna options is needed for the -CELL options: 32256, 32262, or 31128.

The 31128 is a wide-band Yagi directional antenna. It is uniquely suited for cellular applications because of its ability to provide gain across all of the cellular frequency bands. The antenna has a Type N Female connector and includes the mounting hardware. An antenna cable, purchased separately, is required.
COAXRPSMA-L
 
COAXRPSMA-L Antenna Cable LMR195 w/Reverse Polarity SMA & Type N Male Connector
 
This antenna is suitable for use with the -RF and -WIFI options.

One of three cable options is needed per each non-whip antenna. The COAXRPSMA-L is an LMR195 coaxial cable fitted with a Type N Male connector on one end and a Reverse Polarity SMA (RPSMA) male connector on the other end. This cable is commonly used to connect an antenna with Type N connector directly to the datalogger’s radio connector.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

Recommended length is 5 ft (1.5 m). Maximum length is 10 ft (3 m).
COAXSMA-L
 
COAXSMA-L Antenna Cable LMR195 w/SMA & Type N Male Connector
 
This antenna is suitable for use with the -CELL options.

One of three cable options is needed per each non-whip antenna.The COAXSMA-L is an LMR195 coaxial cable fitted with a Type N Male connector on one end and an SMA connector on the other end. This cable is commonly used to connect an antenna with Type N connector directly to a cellular device with an SMA connector.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
One of three cable options is needed per each non-whip antenna. The COAXNTN-L consists of an RG8/U, low-loss coaxial cable fitted with a Type N Male connector on each end. This cable is used when a surge protection kit or Type N bulkhead connector is placed between the antenna and the datalogger.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
31314
 
This accessory is suitable for use with the -RF and -WIFI options.

The 31314 is used with the COAXNTN-L and is suitable for all of the datalogger radio options. The 31314 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
31317
 
This accessory is suitable for use with the -CELL options.

The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
21212
 
The 21212 is used to seal exposed RF connections. The 21212 is a 10-ft roll of black self-vulcanizing tape.

Other Accessories

27373
 
The 27373 facilitates connecting multiple wires into the same terminal, such as for SDI-12.
10873
 
The 10873 is a serial cable that is useful for connecting the RS-232 port of the datalogger to the 9-pin RS-232 port of a computer. The cable is six feet long.
 
The 31970 is a printed copy of the CR300-series operator's manual bound in a 3-ring binder. This is available for purchase separate from the purchase of the datalogger. The 31970 is offered for customers who want a paper manual in addition to the PDF version of the manual provided on the ResourceDVD.
15731
 
This antenna is suitable for use with the -RF and -WIFI options.

The 15731 is a 0 dBd gain 1/4 wave helical antenna with an RPSMA connector designed for use with radios operating at 900 to 935 MHz. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link.
14204
 
This antenna is suitable for use with the -RF and -WIFI options.

The 14204 is a 0 dBd gain 1/2 wave antenna with an RPSMA (reverse polarity SMA) connector and articulating base. It is designed for use with radios operating at 900 to 930 MHz. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link.
17480
 
This antenna is suitable for use with the -RF and -WIFI options.

The 17480 is a 1 dBd gain 1/2 wave antenna with RPSMA connector designed for use with radios operating in one or more of the following bands: 824 to 960 MHz, 1.71 to 1.99 GHz, and 2.40 to 2.48 GHz. It can be used with one of the datalogger RF4XX or WIFI radio options. This low-cost antenna is typically used in applications where it is advantageous to locate the antenna a small distance away from the radio, but high antenna gain is not required to maintain a strong RF link.
31312
 
This accessory is suitable for use with the -RF and -WIFI options.

Commonly used with RF407-series or RF451 radio devices, the 31312 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna or antenna coaxial cable with a Type N connector.

Replacement Parts

15598
 
The 15598 is a 3 V Coin Cell CR2016RTA lithium battery. The 15598 needs to be periodically replaced. Campbell Scientific recommends replacing the battery every five years.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.
27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
3315
 
This type T, 5 in. thermocouple is attached to a differential channel on several of our datalogger wiring panels when the datalogger is shipped.
 
The 32328 control connector is shipped attached to the CR310 datalogger. This lockable connector provides screw terminals for connecting digital sensors and control wires to the CR310. The 32328 may be purchased to replace a lost or damaged universal terminal connector.
 
The 32327 measurement connector is shipped attached to the CR310 datalogger. This lockable connector provides screw terminals for connecting analog sensors to the CR310. The 32327 may be purchased to replace a lost or damaged universal terminal connector.
 
The 32329 power connector is shipped attached to the CR310 datalogger. This lockable connector provides screw terminals for connecting a 12 V battery and/or 16 to 32 Vdc charging sources, such as a power converter or solar panel, to the CR310. The 32329 may be purchased to replace a lost or damaged universal terminal connector.
16005
 
The 16005 ships with the -WIFI version of the CR310. The 16005 is a unity gain (0 dBd), 1/2 wave whip, omnidrectional antenna that can be used with our 2.4 GHz radio products with RPSMA antenna connectors. It features an articulating knuckle joint for easy orientation, weatherized jacket for outdoor applications, and internal counterpoise for ground plane independence.

Services

 
The 31971 requires an RMA (Returned Material Authorization) from Campbell Scientific. When ordered, we recalibrate the CR310 to meet original specifications. Recalibration includes standard temperature testing (-40° to +70°C). Before and after calibration sheets are supplied with the CR310.