The 15730 is a 900 MHz, unity gain (0 dBd), 1/4 wave whip, right-angle antenna. The 15730 is an omnidirectional antenna that attaches directly to the product (no cables). It should be used inside an enclosure or building.
Note: The yellow stripe on the antenna indicates that this antenna operates with a center frequency of 916 MHz.Read More
Omnidirectional antennas pick up signals from all directions. (That is, they don't need to be pointed directly at the source of the signal to pick it up.)
The 15730 attaches directly to a 900 MHz spread-spectrum transceiver that has an RPSMA connector; an antenna cable is not needed. This unity gain, omnidirectional antenna should be used inside an enclosure or building.
Note: The yellow stripe on the antenna indicates that this antenna operates with a center frequency of 916 MHz.
|Antenna Type||1/4 wave whip, indoor antenna, right angle|
|Frequency Band Supported||900 MHz (886 to 946 MHz)|
|Gain||1.16 dBd (3.3 dbi) maximum, typically no gain without associated ground plane|
|Connector||Reverse Polarity SMA (RPSMA) female|
|Manufacturer's Model Name||LINX ANT-916-CW-RCS|
|Diameter||9.4 mm (0.37 in.) maximum|
|Length||53.5 mm (2.11 in.)|
|Weight||8.2 g (0.3 oz)|
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
|CR300||Compatible with the -RF407 and -RF412 options.|
|CR310||Compatible with the -RF407 and -RF412 options.|
|CR6||Compatible with the -RF451, -RF407, and -RF412 options.|
|CRVW3||Compatible with the -RF451, -RF407, and -RF412 options.|
|CRVW3-NE||Compatible with the -RF451, -RF407, and -RF412 options.|
This antenna connects to wireless devices that have a Reverse Polarity SMA (RPSMA) connector and that operate between 900 and 930 MHz. This antenna is not suitable for use with 868 MHz or 2.4 GHz, Wi-Fi, or cellular products.
If this antenna needs to be connected to a radio or bulkhead SMA connector, a 28477 SMA plug to RPSMA jack is required.
If this antenna needs to be connected to a radio or bulkhead Type-N connector, a 18686 Type-N plug to RPSMA jack adapter is required.