Product Details
Typically Ships Within 7 - 14 Days
Restockable Yes
Warranty 1 year
Compliance RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) SC12 SC12 Cable
(1) 17648 USB Cable, Type A Male to Type B Male, 6 ft
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

15966
 
One charger or field cable is needed per base unit or when the radio is used on a datalogger's RS-232 port. The 15966 charger is typically used at the PC where ac power is available.
14291
 
One charger or field cable is needed per base unit or when the radio is used on a datalogger's RS-232 port. The 14291 power cable terminates in a barrel plug on one end and two pigtails on the other end.
14201
 
The 14201 is a high-gain (9 dBd), directional (Yagi) antenna. It is useful for making RF links over longer distances in one direction. This antenna is typically used with sub-315 mW radios. The 14201 requires an antenna cable to connect it to the spread-spectrum transceiver.
14221
 
The 14221 is a 3 dBd omnidirectional antenna for use with many of our spread-spectrum products. The 14221 is suitable for base station use where you need to communicate with multiple stations located in different directions. It is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line-of-sight.
14204
 
The 14204 is a 0 dBd gain 1/2 wave antenna with an RPSMA (reverse polarity SMA) connector and articulating base. It is designed for use with radios operating at 900 to 930 MHz. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link.
15731
 
The 15731 is a 0 dBd gain 1/4 wave helical antenna with an RPSMA connector designed for use with radios operating at 900 to 935 MHz. The 15731 is typically used with one of our 900 MHz radio products with an RPSMA antenna jack. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link.
15730
 
The 15730 is a 900 MHz, unity gain (0 dBd), 1/4 wave whip, right-angle antenna. The 15730 is an omnidirectional antenna that attaches directly to the product (no cables). It should be used inside an enclosure or building.
15970
 
The 15970 is a 1 dBd, omnidirectional antenna. Its adhesive backing adheres to a wall, rear-view mirror, window, or another suitable flat, non-conductive surface. This antenna should reside inside a building or enclosure.
COAXRPSMA-L
 
COAXRPSMA-L Antenna Cable LMR195 w/Reverse Polarity SMA & Type N Male Connector
 
The COAXRPSMA-L is an LMR195 coaxial cable fitted with a Type N Male connector on one end and a Reverse Polarity SMA (RPSMA) female connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a spread-spectrum radio with an RPSMA connector.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

Recommended length is 5 ft (1.5 m). Maximum length is 10 ft (3 m).
COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
The COAXNTN-L consists of an RG8/U, low-loss coaxial cable fitted with a Type N Male connector on each end. It can support any 50 ohm transmission line application.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
31314
 
The 31314 is an RF surge protection kit with flange mounting bracket that is used with the COAXNTN-L. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
21212
 
The 21212 is a 10-ft roll of black self-vulcanizing tape. This cold shrink tape can help protect non-whip antenna connections in RF, cellular, or satellite networks.
18663
 
This 1 ft, null modem cable has 9-pin connectors on both ends for connecting the datalogger's RS-232 port to a peripheral's RS-232 port. An interface such as the SC105 or SC932A is typically not required.
10873
 
The 10873 is a serial cable that is useful for connecting the RS-232 port of the datalogger to the 9-pin RS-232 port of a computer. It is used with DTE devices, such as a PC or NL201.

Other Accessories

19335
 
The 19335 is a factory-installed bulkhead-mounted coaxial cable. The associated enclosure on your order is properly cut to fit the Type N bulkhead connector, and the cable is installed prior to shipment. The cable has a Type N Female bulkhead connector on one end and an RPSMA plug (male) connector on the other. The cable is 17 in. (43.2 cm) of low-loss LMR-195. This cable assembly is generally used with an RF401-series radio, CR206X datalogger, AVW206 spectrum analyzer, or NL240 Wi-Fi interface inside the enclosure and a Type N Male-terminated radio-antenna cable outside the enclosure.

Replacement Parts

193
 
This spacer is needed if screws are used to secure the cable to the device.
SC12
 
The SC12 is our standard cable for connecting the datalogger's 9-pin serial I/O port to most peripherals with a 9-pin port. It is supplied with many of our standard communications peripherals. Its 9-pin male connector attaches to the datalogger's CS I/O port, and the two 9-pin female connectors can attach to peripherals or interfaces.
17648
 
The 17648 is a USB cable for attaching our products to a USB port on a PC. It has a type A male connector for connecting to the PC's USB port and a type B connector for connecting to the Campbell Scientific device.
6044
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
505
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.

Services

21107
 
The 21107 kit includes both the RF407 (0.25 W) and the RF451 (1 W) 900 MHz spread-spectrum radios, allowing the testing of both options to determine the best radio for a site. The kit also includes a combination of antennas and mounting equipment to provide the tools needed to test and design a reliable radio network. The 21107 kit is simple to operate, and no radio experience is required to perform a radio test.

The one-week rental of the 21107 kit includes shipping costs to and from the user's location. To schedule delivery of the kit, download and submit the Radio Test Kit Usage Agreement form.
21109
 
For the 21107 900 MHz Spread-Spectrum Demo Kit, the rental time period starts when Campbell Scientific ships the kit and ends when Campbell Scientific receives the kit. Each week, or a portion thereof, past the original two-week rental will be charged at the amount listed under the Ordering Info.