RETIRED ›
This product is no longer available and has been replaced by: RF450,RF451. Some accessories, replacement parts, or services may still be available.
Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Other Accessories

14203
 
The 14203 is 3 dBd gain omnidirectional antenna. It is suitable for base station use where you need to communicate with multiple stations located in different directions. The 14203 is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line-of-sight.

The 14203 is suitable for outdoor use and terminates in a Type N Female connector. The 14203 requires the COAXNTN cable to connect it to the radio.
13659
 
The 13659 10baseT Ethernet crossover cable is used if the cable is run directly from the computer to the Ethernet port. The cable has a 7 foot length.
14201
 
Suitable for the outdoors, this high-gain (9 dBd), directional (Yagi) antenna has a narrow beam width, so precise aiming is mandatory. The 14201 is useful for longer distances and when communicating only with one other station. The antenna's Type N Female connector attaches to one end of a COAXNTN-L cable. The other end of the cable attaches to the radio.

Please note that because the FCC limits EIRP to 36 dBm, use of this antenna may require a reduction of the radio's transmit power.
14205
 
The 14205 is a high-gain (6 dBd), directional (Yagi) antenna suitable for the outdoors. It transmits for longer distances and communicates with only one other station. The antenna has a Type N Female connector that attaches to the radio via a COAXNTN-L cable.

Please note that because the FCC limits EIRP to 36 dBm, use of this antenna may require a reduction of the radio's transmit power.
14221
 
The 14221 is the highest gain (3 dBd) omnidirectional antenna available for this radio. It is used outdoors and has a Type N Female connector. The COAXNTN-L cable connects the antenna to the radio.
15970
 
Adhesive backing on this antenna adheres to a wall, rear-view mirror, window, or another suitable flat, non-conductive surface. The 15970 is a 1 dBd antenna that should reside inside a building or enclosure.
14204
 
Suitable for inside a building or enclosure, this 0 dBd, ½ wave whip antenna is adjustable from 0° to 90°. The antenna has an RPSMA connector that attaches to the radio via the 18686 Adapter.
15730
 
The 15730 is a unity gain, right angle, whip antenna that should reside inside a building or enclosure. It has an RPSMA connector that attaches to the radio via the 18686 Adapter.
18686
 
Whip antennas attach to the radio via the 18686 RPSMA Female-to-Type N Male Adapter.
COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
One end of this low-loss RG8 antenna cable terminates in a Type N Male connector that attaches to a 14203, 14201 or 14221 antenna. The other end terminates in another Type N Male connector that attaches to the radio.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
31318
 
The 31318 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with a Type N antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
31320
 
The 31320 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with a Type N antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.

Replacement Parts

18849
 
This DC Power Cable ships with the FGR-115RE and may be purchased to replace a cable that has been lost or damaged.
 
FREEWAVE Diagnostics & Programming Cable with a CD containing Software may be ordered if your FGR-network has an odd number of radios, or as a replacement item. One CD and diagnostic cable is shipped with a pair of radios.