Product Details
Restockable Yes
Warranty 1 year
Compliance
Ships With
(1) SC12 Robust CS I/O Cable, 2 ft
(1) 17648 USB Cable, Type A Male to Type B Male, 6 ft
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

15966
 
One charger or field cable is needed per base unit or when used on the data logger's RS-232. The 15966 is a charger typically used at the PC where ac power is available.
14291
 
The 14291 power cable terminates in a barrel plug on one end and two pigtails on the other end. The cable is 2 ft long.
14201
 
One antenna is needed per RF427. Several options are available. The 14201 is a high-gain (9 dBd), directional (Yagi) antenna. It is useful for making RF links over longer distances in one direction.
14221
 
One antenna is needed per RF427. Several options are available. The 14221 is a 3 dBd omnidirectional antenna for use with many of our spread-spectrum products. The 14221 is suitable for base station use where you need to communicate with multiple stations located in different directions. It is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line-of-sight.
14204
 
One antenna is needed per RF427. Several options are available. The 14204 is a 0 dBd gain 1/2 wave antenna with an RPSMA (reverse polarity SMA) connector and articulating base. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link.
15731
 
One antenna is needed per RF427. Several options are available. The 15731 is a 0 dBd gain 1/4 wave helical antenna with an RPSMA connector designed for use with radios operating at 900 to 935 MHz. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link.
15730
 
One antenna is needed per RF427. Several options are available. The 15730 is a 900 MHz, unity gain (0 dBd), 1/4 wave whip, right-angle antenna. The 15730 is an omnidirectional antenna that attaches directly to the product (no cables). It should be used inside an enclosure or building.
15970
 
One antenna is needed per RF427. Several options are available. The 15970 is a 1 dBd, omnidirectional antenna. Its adhesive backing adheres to a wall, rear-view mirror, window, or another suitable flat, non-conductive surface. This antenna should reside inside a building or enclosure.
COAXRPSMA-L
 
COAXRPSMA-L Antenna Cable LMR195 w/Reverse Polarity SMA & Type N Male Connector
 
The COAXRPSMA-L is an LMR195 coaxial cable fitted with a Type N Male connector on one end and a Reverse Polarity SMA (RPSMA) male connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a spread-spectrum radio with an RPSMA connector.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

Recommended length is 5 ft (1.5 m). Maximum length is 10 ft (3 m).
COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
The COAXNTN-L consists of an RG8/U, low-loss coaxial cable fitted with a Type N Male connector on each end. It can support any 50 ohm transmission line application.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

31314
 
The 31314 is used with the COAXNTN-L. The 31314 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
21212
 
The 21212 is used to seal exposed RF connections. The 21212 is a 10-ft roll of black self-vulcanizing tape.
18663
 
The 18663 is used with the RS-232 port on a data logger. This 1 ft, null modem cable has 9-pin connectors on both ends for connecting the data logger's RS-232 port to a peripheral's RS-232 port.
10873
 
The 10873 is used with a DTE device such as a PC or NL201. The 10873 is a serial cable that is useful for connecting the RS-232 port of the data logger to the 9-pin RS-232 port of a computer. The cable is six feet long.

Other Accessories

19335
 
The 19335 is a factory-installed bulkhead-mounted coaxial cable. The associated enclosure on your order is properly cut to fit the Type N bulkhead connector, and the cable is installed prior to shipment. The cable has a Type N Female bulkhead connector on one end and an RPSMA plug (male) connector on the other. The cable is 17 in. (43.2 cm) of low-loss LMR-195.

Replacement Parts

193
 
The 193 may be ordered to replace a lost or damaged spacer jack.
SC12
 
The SC12 is our standard cable for connecting the data logger's 9-pin serial I/O port to most peripherals with a 9-pin port.
17648
 
The 17648 is a USB cable for attaching our products to a USB port on a PC. It has a type A male connector for connecting to the PC's USB port and a type B connector for connecting to the Campbell Scientific device.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.