31128 8 dBd Yagi Wideband Antenna with Mounting Hardware

Ordering Info Ask a Question Ask a Question

RETIRED ›
This product is no longer available and has been replaced by: 38485.

31128 8 dBd Yagi Wideband Antenna with Mounting Hardware

Services Available
Free Support	Yes

Images
Similar Products
Detailed Description
Specifications
Compatibility
Documents
Links
Associations

Overview

The 31128 is a wideband Yagi directional antenna. It is uniquely suited for cellular applications because of its ability to provide gain across all of the cellular frequency bands. The antenna has a Type N Female connector and includes the mounting hardware.

Similar Products

29097 2 dBd Multi-Band Omnidirectional Antenna

20679 800 MHz/0 dBd and 1.9 GHz/3 dBd Omnidirectional Cell Antenna with Mounting Hardware

32256 4G/3G Cellular Whip Antenna with SMA Connector

32262 2 dBd 4G/3G Multiband Omnidirectional Antenna with Mounting Hardware

32261 2 dBd 4G/3G Multiband Omnidirectional Antenna

38485 4G/3G 9 dBi MIMO Cellular Antenna with 2 Type N Socket (Female) Connectors

Detailed Description

The 31128 is a high-gain, directional, Yagi antenna. Its narrow beam width requires precise aiming. This antenna is for fixed installations. It is not intended for mobile applications. For more information, refer to this full-color gain plot.

Specifications

Antenna Type	Yagi, directional, dc grounded
Gain	5.8 dBd (700 to 800 MHz) 5.8 dBd (824 to 894 MHz) 4.8 dBd (880 to 960 MHz) 6.8 dBd (1710 to 1880 MHz) 8.3 dBd (1850 to 1990 MHz) 7.8 dBd (1990 to 2700 MHz)
Average SWR	1.6:1 (700 to 800 MHz) 1.4:1 (824 to 894 MHz) 1.3:1 (880 to 960 MHz) 1.2:1 (1710 to 1880 MHz) 1.2:1 (1850 to 1990 MHz) 1.2:1 (1990 to 2700 MHz)
Impedance	50 ohm
Horizontal Beam Width	70° to 90°
Vertical Beam Width	85° to 110°
Front/Back Ratio	> 20 dB
Maximum Power	100 W
Polarization	Vertical
Connector	Type N female
Temperature	-40° to +158°F
Wind Surface Area	< 465 cm² (0.5 ft²)
Mounting	3.18 to 5.08 cm (1.25 to 2 in.) OD pipe
Dimensions	29.01 x 21.01 x 6.50 cm (11.42 x 8.27 x 2.56 in.)
Weight	1.50 kg (3.31 lb)

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Data Loggers

Product	Compatible	Note
CR300		Compatible with the -WIFI, -RF407, -RF412, -RF422, -RF427, and -CELL2XX options.
CR310		Compatible with the -WIFI, -RF407, -RF412, -RF422, -RF427, and -CELL2XX options.
CR6		Compatible with the -WIFI, -RF407, -RF412, -RF422, -RF427, and -RF451 options.
CRVW3		Compatible with the -RF451, -RF407, -RF412, and -RF422 options.
CRVW3-NE		Compatible with the -RF451, -RF407, -RF412, -RF422, and -RF427 options.

Communication Devices

Product	Compatible	Note
CELL205
CELL210
CELL215
CELL220
CELL225
NL240 (retired)
NL241
RF401 (retired)
RF401A
RF407
RF411A
RF412
RF416
RF422
RF427
RF451 (retired)
RF452
RV50X

Additional Compatibility Information

This antenna is compatible with all of our radios that operate between 700 and 2700 MHz. However, the 31128 is uniquely suited for use with cellular modems. This antenna can be used with any of our cellular product offerings. A coaxial cable is required to attach the 31128 to the radio. This antenna typically attaches to a cellular modem via the 21847 12 ft cable or the COAXSMA-L. If surge protection is required, the 31128 connects via the COAXNTN-L and 31317 surge protection kit.

Mounting

The antenna includes a mount/U-bolt assembly that allows the antenna to be secured to a mast, crossarm, or user-supplied pole with an outer diameter of 3.18 to 5.08 cm (1.25 to 2 in.). The antenna should be mounted with 3 feet of clearance in all directions around it. The 31128 should be positioned so that it has the most unobstructed line of sight to the cellular service provider’s strongest signal, and it should be mounted so that the weep holes are pointing down.