The 32262 is an omnidirectional antenna with mounting bracket that is ideally suited for use with 4G and 3G cellular gateways. The mounting bracket attaches to a mast or crossarm, and it serves as the antenna ground plane. The antenna has an N type (female) threaded permanent stud for easy mounting to the included bracket or through an enclosure wall. A coaxial cable, sold separately, is required to connect this antenna to the inline surge suppression or radio antenna jack.
Note: In the image, the antenna and mounting bracket are shown attached to a pole.
|Use||4G/3G cellular, outdoor or indoor, fixed location or mobile|
|Nominal Peak Gain||
|Radome Material||High heat ABS|
|Maximum Input Power||100 W|
|Input Connection||Type N, threaded, female|
|Operating Temperature||-40° to +85°C|
|Dimensions||8.38 x 3.66 cm (3.3 x 1.44 in.)|
|Material||Clear anodized aluminum|
|Hardware||5/16-18 in. x 2.125 in. stainless-steel U-bolt (with brass nuts and stainless-steel flat and lock washers)|
The 32262 is well suited for 4G/3G cellular communications. It is compatible with Campbell Scientific cellular gateways including the RV50, LS300G, RavenXT-series, Raven100-series, and Redwing100-series.