RETIRED ›
This product is no longer available and has been replaced by: RAVENXTV. Some accessories, replacement parts, or services may still be available.
Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Other Accessories

20679
 
A choice of four antennas is offered for the Redwing100. The 20679 is recommended for locations where cellular coverage is strong. This dual-band omnidirectional antenna covers both the 800-MHz band and the 1.9-GHz band. For the 800-MHz band, the 20679 provides a 0-dBd gain. For the 1.9-GHz band, the 20679 provides a 3-dBd gain. Connection to the Redwing100 requires the 14468 cable (see below).
31128
 
The 31128 is a wideband Yagi directional antenna. It is uniquely suited for cellular applications because of its ability to provide gain across all of the cellular frequency bands. The antenna has a Type N female connector and includes the mounting hardware.
CM230
 
The CM230 Adjustable Inclination Mount allows the Yagi antenna to be aimed at the service provider's antenna. It attaches to a mast or pipe with a 1.3" to 2.1" OD.
21212
 
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.
18663
 
The 18663 is one of three choices for attaching the modem to the datalogger. This null modem cable attaches directly to the datalogger's RS-232 port. It is the only choice available for connecting a Redwing100 modem to a CR200-series datalogger.
SC932A
 
The SC932A is one of three choices for attaching the modem to the datalogger. This interface connects the Redwing100 to the datalogger's CS I/O port. The SC932A is recommended for mixed-array dataloggers.
SC105
 
SC105 CS I/O to 9-Pin RS-232 DCE Synchronous Interface
 
The SC105 is one of three choices for attaching the modem to the datalogger. This interface connects the Redwing100 to the datalogger's CS I/O port. The SC105 is recommended for PakBus dataloggers.
Temperature Ranges
-ST -ST -25 to +50C
-XT -XT -55 to +85C
14394
 
The 14394 Mounting Kit includes hardware for securing the Redwing100 to an enclosure backplate.