32261 2 dBd 4G/3G Multiband Omnidirectional Antenna


The 32261 is an omnidirectional antenna ideally suited for use with 4G and 3G cellular gateways. The antenna has an N type (female) threaded permanent stud for easy mounting through an enclosure wall. This antenna does not include mast mounting hardware. It is intended to be purchased as a replacement part for the 32262 or to be bulkhead mounted through an enclosure wall. A metal ground plane should be provided to the antenna either by bulkhead mounting it through a metal enclosure or with the addition of a metal plate when mounting in a non-metallic enclosure. A coaxial cable, sold separately, is required to connect this antenna to the inline surge suppression or radio antenna jack.



Antenna Type Omnidirectional, multiband
Use 4G/3G cellular, outdoor or indoor, fixed location or mobile
Frequency Range 698 to 960 MHz, 1710 to 2700 MHz
Nominal Peak Gain
  • 1.4 dBd (@ 698 to 960 MHz)
  • 3.3 dBd (@ 1710 to 1990 MHz)
  • 2.4 dBd (@ 2100 to 2700 MHz)
VSWR < 2.5:1
Radome Material High Heat ABS
Polarization Vertical
Impedance 50 ohm
Maximum Input Power 100 W
Input Connection Type N, threaded, female
Operating Temperature -40° to +85°C
Dimensions 8.38 x 3.66 cm (3.3 x 1.44 in.)


The 32261 is well suited for 4G/3G cellular communications. It is compatible with Campbell Scientific cellular gateways including the RV50, LS300G, RavenXT-series, Raven100-series, and Redwing100-series.

Listed Under