The RAD10, manufactured by MetSpec, uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.
Note: In the image, the RAD10 is mounted to a crossarm with an HC2S3-L.Read More
The RAD10 10-Plate Solar Radiation Shield typically houses the HC2S3 Temperature and RH Probe. The probe fits in the bottom of the shield and is held in place with a foam-lined gland that tightens down around the probe.
The RAD10 can also house a 43347 or HMP60 probe. The HMP45C and several other retired sensors are also compatible.
The RAD10 includes a 5.08 cm (2 in.) U-bolt with a plastic V-block. The U-bolt is placed in the holes on the side of the bracket for attachment to a mast or vertical pole. The U-bolt is placed in the holes on the bottom of the bracket for attachment to a crossarm.
|Construction||UV-stabilized white thermoplastic plates, aluminum mounting bracket, white powder-coated stainless-steel U-bolt clamp|
|Plate Diameter||12.3 cm (4.84 in.)|
|Height||20.8 cm (8.19 in.)|
|Weight||1.01 kg (2.23 lb)|
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
The RAD10 attaches to a crossarm, mast, or user-supplied pipe with a 2.54 to 5.334 cm (1.0 to 2.1 in.) OD.