Product Details
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

Common Accessories

HC2S3CBL1-L
 
HC2S3CBL1-L HC2S3 Replacement Analog Cable
 
HC2S3CBL1-L Options - show details
-L Pricing is in ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Campbell Scientific recommends:
  • 9 ft length—probe mounted to mast/leg at a 2 m height
  • 11 ft length—probe mounted to a CM202 at 2 m height
  • 14 ft length—probe mounted atop a CM106B, CM110, or UT10 via a CM202
  • 19 ft length—probe mounted atop a CM115 via a CM202
  • 24 ft length—probe mounted atop a UT20 via a CM202
  • 37 ft length—probe mounted atop a UT30 via a CM202
Add two feet to the cable length if you are mounting the enclosure on the leg base of a CM106B, CM110, CM115, or CM120 tripod.
Cable Termination Options - show details
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
With the -PW option, the cable terminates in a connector that attaches to a prewired enclosure.
-CWS -CWS w/CWS900 Connector
With the -CWS option, the cable terminates in a connector that attaches to a CWS900-series interface. Connection to a CWS900-series interface allows this sensor to be used in a wireless sensor network.
-C -C w/ ET/CS110 Connector
-RQ -RQ w/RAWS Connector

Other Accessories

RAD10
 
When exposed to sunlight, the HC2A-S3 must be housed in a radiation shield. The RAD10 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.
41003-5
 
The 41003-5 is a naturally aspirated 10-plate radiation shield. Its louvered construction allows air to pass freely through the shield, keeping the probe at or near ambient temperature. The shield's white color reflects solar radiation.

Services

 
Order the 27727 to have Campbell Scientific recalibrate the HC2A-S3. The accuracy of the recalibration is ± 2% from 10 to 90% RH and ± 3% from 90 to 100% RH. Campbell Scientific supplies before and after calibration sheets.