Standard Enclosures / ENC24/30
ENC24/30
 
ENC24/30 Weather-Proof 24 x 30 Mild Steel Enclosure
 
Enclosure Hole Options
-SC -SC 1 Conduit for Cables
-DC -DC 2 Conduits for Cables
-TC -TC 3 Conduits for Cables
-QC -QC 4 Conduits for Cables
-ES -ES 12Entry Seals for Cab
-NC -NC No Conduit/Entry Seal
Enclosure Mounts
-NM -NM No Enclosure Mounting

Add to your Quote List


Product Details
Typically Ships Within 14 - 21 Days
Restockable Yes
Warranty 1 year
Compliance

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 7363 Enclosure Supply Kit, Standard Size
(4) Bolts (from original mfg)
(4) Nuts (from original mfg)
(4) Sealing washers (from original mfg)

Common Accessories

10525
 
The 10525 is attached to the inside of the lid of the enclosure with adhesive Velcro strips (supplied). The holder accommodates two packages of our 4-unit desiccant.
CS210
 
The CS210 Enclosure Humidity Sensor contains an Elan HM2000-series precision bulk polymer relative humidity sensor. It senses relative humidity levels inside the environmental enclosure for the purpose of scheduling desiccant exchange. The desiccant should be exchanged when the sensor indicates an RH level of 35% or more inside the enclosure.
6714
 
The 6714 includes twenty 4-unit Silica Gel Desiccant Bags.
31551
 
The 31551 is a kit to allow stacking of components inside Campbell Scientific enclosures. The kit includes two leg brackets. It is used to raise a datalogger up and off the backplate so that wiring is easier or so that components can be stacked.
31143
 
The 31143 is a hinged stack bracket that is designed to fit a CR1000 datalogger, CR6 datalogger, or multiplexter on either the top or underneath. The hinge enables access to the equipment underneath without disconnecting any wires (assuming that the wires are long enough).
31312
 
Commonly used with RF407-series or RF451 radio devices, the 31312 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna or antenna coaxial cable with a Type N connector.
31315
 
Commonly used with cellular devices, the 31315 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
31318
 
For use with third-party radios such as the FGR-11RC or FGR-115RE. The 31318 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with a Type N antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
31321
 
For use with HUGHES9502 and other third-party radios such as the FGR2-PE or XLR Pro. The 31321 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with a TNC antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
31324
 
For use with GPS antennas for TX320, AL200, COM9522B, or similar products. The 31324 is a GPS RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a GPS receiver with an SMA antenna connection. The other side connects to the GPS antenna/antenna coaxial cable with Type N connector. The surge protector passes up to ±6 Vdc, commonly needed for active GPS antenna applications.
31327
 
For use with the TX320. The 31327 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with a Type N antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
31330
 
For use with the ST-21 or RF320-series. The 31330 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with a BNC antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
27814
 
Specify this to have Campbell Scientific install a CD100 in the enclosure door. The CD100 allows users to enter data and view both real-time and historical data, without opening the enclosure. Users can customize menus and displays, simplifying routine operations. The CD100 is typically used with the CR800 and CR1000.

Other Accessories

 
The 19332 is a factory-installed 17 in. (43.2 cm) cable attached to a Type N connector on the inside of an enclosure, providing a Type N connector on the outside for attachment of a radio antenna. It is intended for enclosures that will house an RF320-series narrowband radio or TX320 HDR GOES satellite transmitter.
 
The 19333 is a factory-installed 17 in. (43.2 cm) cable attached to a Type N connector on the inside of an enclosure, providing a TNC connector on the outside for attachment of an antenna. It is intended for customers who will use a Raven100-series or Redwing100-series digital cellular modem with a 14454, 20679, or 18285 antenna (not used with the 14453 antenna).
 
The 19334 is a factory-installed 17 in. (43.2 cm) cable with an SMA connector on the inside of an enclosure and a Type N connector on the outside for attachment of an antenna. It is intended for enclosures that will house our RF450 radio, a RavenXT-series cellular modem, or a user-supplied Freewave radio.
19335
 
The 19335 is a factory-installed bulkhead-mounted coaxial cable. The associated enclosure on your order is properly cut to fit the Type N bulkhead connector, and the cable is installed prior to shipment. The cable has a Type N Female bulkhead connector on one end and an RPSMA plug (male) connector on the other. The cable is 17 in. (43.2 cm) of low-loss LMR-195. This cable assembly is generally used with an RF401-series radio, CR206X datalogger, AVW206 spectrum analyzer, or NL240 Wi-Fi interface inside the enclosure and a Type N Male-terminated radio-antenna cable outside the enclosure.
 
The 19336 is a factory-installed 17 in. (43.2 cm) cable attached to an SMA connector on the inside of an enclosure, providing an SMA connector on the outside for attachment of an antenna. It is intended for enclosures that will house the GPS device used with our satellite transmitter.

Replacement Parts

28878
 
The 28878 is a replacement humidity indicator card. It provides a visual reference of humidity level inside the enclosure. Colored circles change color from blue to pink to indicate humidity levels of 30%, 40%, and 50% relative humidity. Double sticky tape on the back of the card allows it to be easily secured to an enclosure lid.
28416
 
This anodized aluminum backplate is completely pre-punched with a matrix of half-inch-on-center holes.
6832
 
One 6832 filter may be installed in one of the small compression fittings (cable entry seals) in the enclosure to allow air pressure to equalize between the inside and outside of the enclosure. As such, the filter is used only when the cable entry seals option is selected for the enclosure. The filter is typically used when a barometric pressure sensor (or, in some cases, the cable termination of a vented submersible pressure transducer) will be located inside the enclosure. The filter has a 60 micron pore size.
 
A couple of these nuts are attached to the enclosure bracket. The nut may be purchased to replace a lost or damaged nut.
7363
 
The enclosure supply kit includes desiccant, a humidity indicator card, cable ties, wire tie tabs, putty for sealing the conduit, and screws and grommets for attaching peripherals to the enclosure backplate.
 
The 25744 and 25746 are the two parts used to create the standard conduit for Campbell Scientific enclosures. If a portion of the conduit for an ENC or PWENC enclosure becomes lost, the 25744 and 25746 can be ordered as replacements.
 
The 25746 and 25744 are the two parts used to create the standard conduit for Campbell Scientific enclosures. If a portion of the conduit for an ENC or PWENC enclosure becomes lost, the 25746 and 25744 can be ordered as replacements.