15731
15731
Limited availability900 MHz 0 dBd 1/4 Wave Omnidirectional Antenna with RPSMA Connector
Overview
The 15731 is a 0 dBd gain 1/4 wave helical antenna with an RPSMA connector designed for use with radios operating at 900 to 935 MHz. The 15731 is typically used with one of our 900 MHz radio products with an RPSMA antenna jack, such as the RF401A and RF411A. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link.
Note: The yellow stripe on the antenna indicates that this antenna operates with a center frequency of 916 MHz.
Technical Description
The 15731 is a 0 dBd gain 1/4 wave antenna with an RPSMA pin (male) connector. It has an omnidirectional radiation pattern and a center frequency of 916 MHz. It is fully weatherized and is therefore suitable for indoor and outdoor use.
Note: The yellow stripe on the antenna indicates that this antenna operates with a center frequency of 916 MHz.
Specifications
- -NOTE-
- Electrical specifications measured with 10.16 x 10.16 cm (4 x 4 in.) reference ground plane.
- Connector
- RPSMA
(Reverse Polarity SMA)
- Center Frequency
- 916 MHz
- Frequency Range
- 900 to 935 MHz
- Gain
- None
- Wavelength
- 1/4 wave, helical
- VSWR
- < 1.9 typical
(at center)
- Impedance
- 50 ohm
- Operating Temperature Range
- -40° to +90°C
- Maximum Dimensions
- 51.0 mm (2.0 in.) length x 8.5 mm (0.33 in.) diameter
- Weight
- 45.36 g
(0.1 lb)
Similar Products
(5)14201
900 MHz 9 dBd Yagi Antenna with Mounting Hardware
Orderable14221
900 MHz 3 dBd Omnidirectional Antenna with Mounting Hardware
Orderable14204
900 MHz 0 dBd 1/2 Wave Omnidirectional Antenna with RPSMA Connector
Orderable15730
900 MHz 0 dBd 1/4 Wave Omnidirectional Antenna with RPSMA Connector
Limited availability15970
900 MHz 1 dBd Omnidirectional Dipole Antenna with Adhesive Mount
Orderable
Compatibility
The 15731 covers the frequency bands used by some of our spread-spectrum radios operating in the 900 MHz range. Because it has an RPSMA plug connector, the 15731 can only be directly connected to a radio product or cable with an RPSMA jack. This includes, but is not exclusive to, the RF401A, RF411A, CR206X, CR211X, AVW206, and AVW211. Adapters such as pn 28477 and pn 18686 can be used to adapt this antenna to an RF connection other than an RPSMA.
Compatible Products
(11)RF401A
900 MHz Spread-Spectrum Radio
OrderableNotes—RF411A
922 MHz Spread-Spectrum Radio
OrderableNotes—RF407
900 MHz Spread-Spectrum Radio
OrderableNotes—RF412
922 MHz Spread-Spectrum Radio
OrderableNotes—CR310
Measurement and Control Datalogger
OrderableNotesCompatible with the -RF407 and -RF412 options.
CR6
High-Capacity Data Acquisition System
OrderableNotesCompatible with the -RF451, -RF407, and -RF412 options.
CRVW3
Vibrating Wire Node
OrderableNotesCompatible with the -RF451, -RF407, and -RF412 options.
CRVW3-NE
Vibrating Wire Node without Enclosure
OrderableNotesCompatible with the -RF451, -RF407, and -RF412 options.
AVW206
900 MHz Wireless 2-Channel Vibrating Wire Analyzer Module
Limited availabilityNotes—CR350
Measurement and Control Datalogger
OrderableNotesCompatible with the -RF407 and -RF412 options.
RF452
900 MHz 1 W Spread-Spectrum Radio
OrderableNotes—
