CS210
CS210
RetiredEnclosure Humidity Sensor
No longer available to order
This product is retained for service, documentation, and compatibility information.
Replaced by
- CS211
Smart Enclosure Sensor
- Model:
- CS210
- Item Number:
- 10162
- Warranty:
- 1 year
Overview
The CS210 enclosure humidity sensor measures relative humidity levels inside environmental enclosures. The sensor is housed inside the enclosure. A Campbell Scientific data logger measures this sensor and stores its data.
Key Advantages
Ensure ideal conditions in enclosures
Technical Description
When CS210's measurements indicates that the RH level inside the enclosure is 40% or more, the desiccant should be replaced with another packet.
By having the data logger measure the sensor, the measured values can be incorporated into the transmitted data stream of remotely located data loggers. The probe has an 11-in. (28 cm) cable length, which should be adequate to place the probe near the enclosure conduits.
Benefits
- Allows enclosure RH to be monitored remotely
- Used to schedule desiccant replacement
Specifications
- Sensor
- Elan HM2000 series precision bulk-polymer
- Relative Humidity Measurement Range
- 0 to 100%
(non-condensing)
- RH Output Signal Range
- 0 to 1.0 Vdc
- Accuracy
- ±3% RH (10 to 90% RH)
(at 25°C)
- Typical Long-Term Stability
- Better than 3% RH per year
- Response Time
- 10 seconds for a 30% to 90% RH step change
(at 25°C, 90% response)
- Current Consumption
- < 0.5 mA
- Supply Voltage
- 5 ± 0.25 Vdc
- Settling Time
- 10 s
- Operating Temperature Range
- 0° to 50°C
- Cable Length
- 27.9 cm
(11 in.)
- Sensor Head Dimensions
- 2.5 x 1.3 x 0.8 cm
(1.0 x 0.5 x 0.3 in.)
- Weight
- 9 g
(0.3 oz)
Replacement Parts
(2)2207
4 in. Nylon Cable Tie
The cable ties are constructed from a flexible, nylon material. A connection is made by pulling the tapered end through the locking end, thus forming a loop. The free end is pulled tight to secure the cables, then trimmed back to the locking end. Once attached, the cable tie must be cut to be removed.
Orderable2376
Adhesive-Backed Cable Tie Mount
The 2376 consists of small, 3 cm square tabs with adhesive backing. The 2376 mounts attach to the inside of an enclosure to provide an anchor for attaching the cable ties. The cable ties, in turn, are used to secure cables and wires, thus providing strain relief and cable routing inside the enclosure.
Orderable
