14310 900 MHz 0 dBd 1/4 Wave Omnidirectional Antenna with RPSMA Connector

Overview

The 14310 is a 0 dBd gain 1/4 wave antenna with RPSMA connector designed for use with radios operating at 865 to 965 MHz. It is typically used with one of our 900 MHz radio products with an RPSMA antenna jack, such as the RF401A and RF411A. This small, low-cost antenna is typically used in applications where space is constrained and antenna gain is not required to maintain a strong RF link. 

Note: The yellow stripes on the antenna indicate that this antenna operates with a center frequency of 916 MHz.

Read More

Images

Detailed Description

The 14310 is a 0 dBd gain 1/4 wave antenna with an RPSMA male plug connector. It has an omnidirectional radiation pattern and a center frequency of 916 MHz. It is fully weatherized and is therefore suitable for indoor and outdoor use.

Note: The yellow stripes on the antenna indicate that this antenna operates with a center frequency of 916 MHz.

Specifications

-NOTE- Electrical specifications measured with 10.16 cm x 10.16 cm (4 in. x 4 in.) reference ground plane.
Connector RPSMA (Reverse Polarity SMA)
Center Frequency 916 MHz
Frequency Range 865 to 965 MHz
Gain 0 dBd
Wavelength 1/4 wave
VSWR < 1.9 typical at center
Impedance 50 ohm
Operating Temperature Range -40° to +90°C
Maximum Diameter 14.5 mm (0.57 in.)
Maximum Length 80.0 mm (3.15 in.)

Compatibility

The 14310 covers the frequency bands used by our spread-spectrum radios operating in the 900 MHz range. However, because it has an RPSMA plug connector, the 14310 can only be directly connected to a radio product with an RPSMA jack. This includes, but is not exclusive to, the RF401A, RF411A, CR206X, CR211X, AVW206, and AVW211. Adapters such as pn 28477 and pn 18686 can be used to adapt this antenna to an RF connection other than an RPSMA.

Contemporary Devices

The 14310 is compatible with (can be connected directly to) these current products:

Spread-Spectrum Radios

  • RF401A
  • RF411A
  • RF407
  • RF412
  • RF451

Dataloggers

  • CR300-RF407
  • CR300-RF412
  • CR310-RF407
  • CR310-RF412
  • CR6-RF407
  • CR6-RF412
  • CR6-RF451
  • CRVW3-RF407
  • CRVW3-RF412
  • CRVW3-RF451
  • CRVW3-NE-RF407
  • CRVW3-NE-RF412
  • CRVW3-NE-RF451
  • CR206X
  • CR211X

Vibrating-Wire Peripherals

  • AVW206
  • AVW211

Wireless Sensor Interfaces

  • CWB100
  • CWB100A

Retired Devices

The 14310 is compatible with these retired products:

Spread-Spectrum Radios

  • RF400
  • RF401
  • RF430
  • RF410
  • RF411
  • RF431

Dataloggers

  • CR205
  • CR210
  • CR206
  • CR211