Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
problem with "the datalogger's PakBus address is 4095" Tomek 8
Data table column with time in seconds since 1970 or before 3LPs 4
How keep data table JhnRqlm 0
mV/V on cr1000X with excitation needs of 5 to 12V AEZatNHc 0
K&Z CNR4 - RnAs vs calculated net radiation HMNIBIO 0
AT commands modem on CR300 Benjamin.vial 3
MODBUS with Handshake Monte 1
The best solution to implement a measurement cycle with two parts. tomasafonso 3
MLX90614 i2c sensor to CR1000x Yuvash 3
4-20mA circuit issue Pscamm 2
Sending email and text messages Michael Lily 1
Remotely control power to CR6 logger --dd-- 3
KonectGDS MatiasFernandez1422 0
No able to read IR120 sensors after having change a CR1000 program Otemohu 1
Bug in Device Configuration Utility 2.26? artyb 6
Problem communication between CR1000 and PC SangNguyen 3
Unable to access CR1000X due to failed program Daniwenz 7
How to read TTL output vk 4
Header is sent every time when sending multiple files over FTP Tiberiu 3
PulsePort on CR6 using U ports Monte 3
Using USB to get data from a CR350 TaCaPica 4
I2C Sensor "Library" --dd-- 4
Scheduled collection every X seconds and new filename every X hours gcauble 5
Optimizing Data Collection hordeweek 0
Conversion of Thies Station with (analogue) Sun, Wind, and Baro meassurements jonas 2
MQTT Publish Table with CR310 niko 2
TLS Handshake occurring for every MQTT Publish? jhurmence 4
Receiving and sending data from CR1000/X by ftp artyb 31
PC-TDR/TDR200 "NAN" for VWC? andrean 2
Skipped Scans using SDI-12 with CR6 at 1-Second Scan Interval dbrese_stone-env 7