CABLE4CBL-L 4-Conductor 22 AWG Cable with Drain


The CABLE4CBL-L is a 22-AWG, four-conductor cable with a Santoprene jacket and an aluminum Mylar shield. The conductors are stripped and tinned and have red, black, green, and white insulation colors.

The "-L" on a product model indicates that the cable length is specified at the time of order.


Frequently Asked Questions

Number of FAQs related to CABLE4CBL-L: 1

  1. Whenever possible, purchase a sensor with the desired cable length. Some sensors have a user-specified cable length, whereas other sensors have a set cable length.

    Sometimes, an old cable can be replaced with a new, longer cable.

    Generally, additional cable cannot be spliced onto the existing cable because:  

    • Some sensor cables have bridge completion resistors at the pigtail end
    • Some sensors are calibrated based on cable length
    • Sometimes the color in the insulation is not the same as that visible at the pigtail end
    • It is possible to introduce errors or malfunctions depending on the integrity of the splice

    Splicing cable together increases the likelihood that water may enter the cable and cause shorting, corrosion, and some other potential issues, which in turn can cause measurement issues.

    Because of the potential issues, do not splice any sensor cable without first contacting Campbell Scientific to discuss the sensor in detail.

Privacy Policy Update

We've updated our privacy policy.  Learn More