AM16/32B Ordering Information

Prior to serial number 19310 (September 2014), the 19237 cover was included with the AM16/32B. Now, however, removable terminals are used for the AM16/32B, and the cover must be purchased separately as needed. This terminal cover helps reduce thermal gradients across the input terminals and protects the input connections from unintended jostling.

This 22 AWG, four-conductor cable has a Santoprene jacket and an aluminum Mylar shield. The CABLE4CBL-L is the preferred cable for supplying power and control signals from the datalogger to the AM16/32B. When the AM16/32B is used in the 4 x 16 mode, another CABLE4CBL-L can connect the measurement/excitation channels of the datalogger with the COM terminals of the multiplexer. A 2-foot length should be sufficient if the datalogger and AM16/32B are housed in an ENC16/18 enclosure.

This 22 AWG, three-conductor cable has a Santoprene jacket and an aluminum Mylar shield. When used in a 2 x 32 mode, the CABLE3CBL-L cable is recommended for connecting the measurement/excitation channels of the datalogger with the COM terminals of the multiplexer. A 2-foot length should be sufficient if the datalogger and AM16/32B are housed in an ENC16/18 enclosure.

This 22 AWG, five-conductor cable has a Santoprene jacket and an aluminum Mylar shield. For the 4 x 16 mode, the CABLE5CBL-L is recommended for connecting the COM terminals when it is desirable to connect both shields. A 2-foot length should be sufficient if the datalogger and AM16/32B are housed in an ENC16/18 enclosure.