Product Details
Restockable Yes
Warranty 1 year
Compliance RoHS Compliance Image

Common Accessories

21847
 
The 21847 or COAXSMA-L is used to connect the antenna to the cellular gateway. The 21847 has a 12-foot length. It consists of an LMR195 coaxial cable that terminates in a Type N male connector on the "antenna end" and an SMA connector on the "cellular end." If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Suppressor Kit instead of this cable.
COAXSMA-L
 
COAXSMA-L Antenna Cable LMR195 w/SMA & Type N Male Connector
 
The COAXSMA-L or 21847 is used to connect the antenna to the cellular gateway. The COAXSMA-L is offered for customers who want a user-specified lead length. It consists of an LMR195 coaxial cable that terminates in a Type N male connector on the "antenna end" and an SMA connector on the "cellular end." If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Suppressor Kit instead of this cable.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
The COAXNTN-L is a low-loss RG8 coaxial cable. It is used to connect the antenna to an inline surge suppressor or a bulkhead connector with a Type N jack.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft


Other Accessories

31315
 
Commonly used with cellular devices, the 31315 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
31317
 
The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.

Replacement Parts

18098
 
The 18098 is used to mount a user-supplied Eppley solar sensor or a 18285 omnidirectional antenna to a tripod or tower. This mounting stand is shipped with the 18285 antenna, and is available as a replacement part.
32261
 
The 32261 is an omnidirectional antenna ideally suited for use with 4G and 3G cellular gateways. The antenna has an N type (female) threaded permanent stud for easy mounting through an enclosure wall. This antenna does not include mast mounting hardware. It is intended to be purchased as a replacement part for the 32262 or to be bulkhead mounted through an enclosure wall.