This product is no longer available and has been replaced by: RAVENXTG. Some accessories, replacement parts, or services may still be available.
RAVEN110 GPRS/EDGE Cellular Digital Modem


The Raven110 was an Airlink product intended for AT&T digital cellular networks. This full-duplex modem transmitted data to the local cellular tower using either a GPRS or EDGE network. The data was sent from the tower to the base station computer via the Internet. Communicating via Internet provided faster communication rates and eliminates dialing delays and long distance fees.



Description Quadband EDGE (MS class 10) with dualband GPRS (MS-12) fallback
EDGE Quadband 1900/850 MHz and 1800/900 MHz
GPRS Dualband 1900/850 MHz
Transmit Frequency 1850 to 1910 MHz and 824 to 849 MHz
Transmit Power
  • 1.0 W for 1900 MHz
  • 2.0 W for 850 MHz
Receiver Frequency 1930 to 1990 MHz and 869 to 894 MHz
EDGE Throughput Up to 384 kbps
GPRS Throughput Up to 70 kbp
RS-232 Data Rates 1200 bps to 115.2 kbps
Operating Temperature Range -30° to +70°C (10% duty cycle limit above 60°C)
Serial Interface RS-232


Datalogger Considerations

Compatible Contemporary Dataloggers

CR200(X) Series CR800/CR850 CR1000 CR3000 CR9000X

Compatible Retired Dataloggers

CR500 CR510 CR10 CR10X 21X CR23X CR9000 CR7X CR5000

*Although the CR9000X and CR9000 are compatible, the Raven110 does not support their fastest communication rates, and is therefore not practical for most of their applications.


Raven GPRS/EDGE Template 9600 (27 KB) 02-11-2013

For use with AT&T and other (GPRS/EDGE) Raven modems.

This template file is used with the Sierra Wireless ACEManager software to configure the AirLink Raven modem to 9600 baud.  The CR200(X), CR10(X), CR510, CR500, 21X and CR7 dataloggers communicate at 9600 baud.

Case Studies

California: Irrigation Control
Alfalfa is a thirsty crop. It uses more than 20 percent of all of more
West Texas Mesonet
The West Texas Mesonet (WTM) project was initiated by Texas Tech University in 1999 more

Articles and Press Releases