The SC12R-6 connects two or more 9-pin peripherals to the CS I/O port of a Campbell Scientific data logger. The SC12R-6 may be "daisy-chained" to connect one additional peripheral with each additional cable.
This cable is similar to the SC12, but it has a 6 ft length between connectors instead of a 2 ft length.Read More
The SC12R-6 cable is similar to the SC12, but has a 6-ft length between connectors instead of a 2 ft length. This cable has one 9-pin pin (male) connector that attaches to the data logger's CS I/O port and two 9-pin socket (female) connectors that can attach to peripherals with a 9-pin RS-232 port. Additional peripherals can be connected by attaching one of the two socket (female) connectors with the pin (male) connector of an additional SC12R-6 or SC12 cable.
Some customers have found the longer SC12R-6 particularly useful for DSP4 Heads Up Display applications.
|Connectors||One 9-pin pin (male), two 9-pin socket (female)|
|Operating Temperature Range||-65° to +150°C|
|Length||182.9 cm (72.0 in.)|
|Weight||227 g (8 oz)|
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
The SC12R6 can be used with many of our standard communication peripherals including our COM220, COM320, CR1000KD, MD485, RF401-series, RF450, TX312, SC32B, RF500M, ST-21, SC105, SC-USB, NL100, SC932A, and SDS122. Retired products that are compatible with this cable include the SC532A, DSP4, COM200, COM210, COM310, COM300, CR10KD, SDC99, COM100, CSM1, SAT ARGOS, ST-20, SAT HDR GOES, DC112, DC1765, SC232, SC32A, SC532, SC932, SC95A, SM16, SM192, SM64, SM232A, SM716, and VS1.
The SC12R-6 is compatible with any data logger with a nine-pin CS I/O port.
Update your cookie preferences. Update Cookie Preferences