Overview
The 9598 is a replacement relative humidity chip for the HMP60, HMP50, and CS500 temperature and relative humidity probes. Users can replace this chip in the field, eliminating the downtime typically required for the recalibration process.
Read MoreImages
Detailed Description
The 9598 provides a replacement RH chip and filter cap for an HMP60, HMP50, or CS500 temperature and RH sensor. The 9598 is plugged into a socket underneath the end cap and filter assembly. Please note that there is a small bump that acts as a standoff between the RH chip and the temperature circuit. The chip should be inserted so that the bump faces the temperature circuit.
Campbell Scientific recommends chip replacement every 2 to 3 years depending on the application.
Specifications
| Dimensions | 10.2 x 2.5 x 1.3 cm (4.0 x 1.0 x 0.5 in.) |
| Weight | 22.68 g (0.05 lb) |
Compatibility
Listed Under
- HMP60-ETS - Temperature/RH Probe for ET Station with Shield Adapter
- HMP60-ET - Temperature/RH Probe for ET Station
- HMP60-ETR - Temperature/RH Probe for ET Station with Shield Adapter
- HMP60-L - Air Temperature and Relative Humidity Sensor
- HMP50-L - Temperature and Relative Humidity Sensor
- CS500-L - Temperature and Relative Humidity Probe
- CS500-ET - Vaisala 50Y Temperature and RH Probe for ET Stations, 54 inch Cable
- HMP50-ET - Vaisala Temperature/RH Probe for ET Station, 54 inch cable
Privacy Policy Update
We've updated our privacy policy. Learn More
Cookie Consent
Update your cookie preferences. Update Cookie Preferences