Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
SDM-SIO1A won't communicate with instrument when bus termination resistor enabled artyb 1
DataLogger tinexobi 8
Using serial port to change logger datetime or download tables Miguel_____ 0
Avg/max/min of last 6 sec of a min mak 2
how the average wind direction is calculated smile 2
PakBus framing errors - reboot clears this up for a short time tjwilli_58 4
Troubleshooting HMP60 reading incorrect value thomas.miletich 2
CR1000X programming Vaisala GMP252 - CO2 sensor Boris 3
What is the 192.168.1.1 ? 19216811vn 4
Problem with Aanderaa temp sensor, Rs232 uta 14
CR3000 12V output only 0.12V tjwilli_58 4
Collect data from 5 CR1000X in the 1 data table file chalit 2
Pass a constant into an include file --dd-- 3
Data Loss due to power down (CR1000X) firminf 3
Loggernet Stream error rr4v 10
testing checho 1
Using COM232 as sensor input fabiograsso81 1
CR1000 internal battery Makada 7
LoggerNet Admin, repeating records Nigel 2
NetworkTimeProtocol CR1000X - no correct adjustement GNWCLZ 0
Convert Long to Float --dd-- 3
Sending both SMS and email schiller 8
Using Cr1000 with analog Fiber-optic oxygen meter JHolger 2
GetVariables code? 131 0
Serial ModBus communication between sensor and CR1000X Technician 0
MQTT Publish Table failed with CR6 Thein 0
Epoch time to normal Date/Time format Thein 4
CRBasic high CPU usage Colin A. 0
Rename file after each write iperez 2
CR1000x - records skipped each 30min HMNIBIO 2