Intended for our ET107 stations, the 29354 is a wireless networking peripheral that provides Wi-Fi connectivity over standard 802.11b/g/n networks. It is a low-power device that offers unique and powerful PakBus networking capabilities, but it is easy to configure.
The 29354 includes a wireless network link interface.Read More
The 29354 can take advantage of the thousands of Wi-Fi hotspots available in cafés, universities, hotels, and airports. Wi-Fi also provides encryption to protect traffic and uses a global set of standards so the same device can be used internationally.
The 29354 is an industrial Wi-Fi kit that goes beyond the typical Wi-Fi serial device server. It supports Wi-Fi communication with an iOS or Android device when used with our LoggerLink apps. The 29354 provides:
|Material||Aluminum case with black anodized finish|
|CS I/O Port||SDC 7, 8, 10, or 11 (Does not support ME.)|
|RS-232 Port||DTE, DB9 Male|
|Operating Temperature Range||-25° to +50°C (standard)|
|Dimensions||16 x 6.73 x 2.54 cm (6.3 x 2.65 x 1 in.)|
|Weight||177 g (6.3 oz)|
|RS-232 Port||1200 to 115.2k bps|
|CS I/O Port||9600 to 460.8k bps|
|Supported Technologies||802.11b/g/n, WPA, WPA2 /TKIP or AES, WEP, WEP(open), APIPA/AutoIP, IPv4, IPv6, ICMP/Ping, ICMPv6/Ping, TCP, DHCP Client, SLAAC, DNS Client, HTTPS Proxy, Telnet Server, TLS, PakBus, Modbus, TCP/IP|
|Topologies||Infrastructure and ad-hoc|
|Transmit Power||7 to 17 dBm (5 to 50 mW)|
|Rx Sensitivity||-97 dBm (< 8% PER)|
|Frequency||2.4 to 2.5 GHz (2.4 GHz ISM band)|
|Power Connector||CS I/O Port (not powered over USB)|
|Supply Voltage||7 to 20 Vdc|
|Typical (Always On)||
|Typical (Low Power Mode Enabled)||
The 29354 is compatible with the ET107 Evapotranspiration Monitoring Station.
The Device Configuration Utility must be version 2.03 or higher.
Note: The data logger OS must be OS 25 or higher for bridge mode applications.