ET107
 
ET107 ET Station
 
Charging Sources - show details
-NC -NC No Charging Source
This option is for customers who wish to supply their own charging source.
-AC -AC AC Power Kit
This option float charges the system's sealed rechargeable battery via ac power. It requires 110 Vac power to be available and properly installed at the site.
-SP -SP 10W Solar Panel
This option float charges the station's internal battery via a 10 W solar panel. The solar panel's cable terminates in a connector that plugs into the outside of the ET107 enclosure. Cable length is 46 in.
Communications - show details
-NM -NM No Modem
Select this option if you wish to use a spread spectrum radio, digital cellular modem, or some other user-supplied communications. Spread spectrum radios and digital cellular modems are provided under other accessories.
-SH -SH Short Haul Modem Kit
The Short-Haul Modem Kit enables local communication between the ET107 and a computer RS-232 serial port. The kit includes two RAD modems, a 10596 interface, a surge protector for the computer, a cable burial splice kit, and three cables.
-PH -PH Phone Modem Kit
The Phone Modem Kit enables communication between the station and a computer equipped with a Hayes-compatible modem over a public switched telephone network. The kit includes a COM220 telephone modem, a 20-ft cable allowing attachment to the enclosure, burial splice kit for attachment to a phone line, and a patch cord to connect the COM220 to the RJ11C telephone jack. Surge protection is built into the ET107 board. The COM220 is programmed for use in the US or Canada. Refer to the 19154 other accessory if you are in the UK.
Wind Sensor Options - show details
-MW -MW Met One 034B-ETM Wind
The 034B Wind Set combines a 3-cup anemometer and vane into a single integrated package. The cable terminates in a connector and is the ideal length for attachment to the ET107 ETo Weather Station. It includes a mount for attaching the sensor to the ET107.
-GW -GW Gill WindSonic1-ETM
The WindSonic1 does not have moving parts, which minimizes routine maintenance. It outputs an RS-232 signal that the ET107's on-board CR1000 can measure. The cable terminates in a connector and is the ideal length for attachment to the ET107 ETo Weather Station. It includes a mount for attaching the sensor to the ET107.
Mounting Pole Option - show details
-NP -NP No Pole
Choose the -NP option if you want to attach the enclosure to your own instrument mount.
-3M -3M 3m Aluminum Pole
Two sections of a white, aluminum pole provide an assembled length of 8'9".
Shipping Kit Option - show details
-NS -NS No Ship Kit
-SS -SS Standard Shipping Kit
This kit is recommended for most applications.

Add to your Quote List


Product Details
Typically Ships Within 21 - 28 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

VISUALWEATHER
 
VISUALWEATHER Weather Station Software
 
VisualWeather provides comprehensive, but easy-to-use, software support for the ET107.
Delivery Method
-D -D Download Only
-DD -DD Download & CD Disc
VISUALWEATHER/U
 
VISUALWEATHER/U Upgrade to Current Version
 
Delivery Method
-D -D Download Only
-DD -DD Download & CD Disc

Other Accessories

CS650-LC
 
CS650-LC 30cm Water Content Reflectometer Plus for ET
 
The CS650-LC is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature. It has 30-cm rods. Enter the cable length, in feet, after the -LC.
Cable Length - show details
-LC ft cable per probe

Allowed values: 1-1000 ft, increments of 1 ft

Maximum cable length is 1000 ft (300 m).
CS655-LC
 
CS655-LC 12cm Water Content Reflectometer Plus for ET
 
The CS655-LC is a multiparameter smart sensor that uses innovative techniques to monitor soil volumetric water content, bulk electrical conductivity, and temperature. It has 12-cm rods. Enter the cable length, in feet, after the -LC.
Cable Length - show details
-LC ft cable per probe

Allowed values: 1-1000 ft, increments of 1 ft

Maximum cable length is 1000 ft (300 m).
CS616-LC
 
CS616-LC Water Content Reflectometer for ET or MetData1
 
The CS616-LC Soil Water Content Reflectometer; can provide soil water content measurements; enter the lead length, in feet, after the -LC.
Cable Length - show details
-LC ft cable per probe

Allowed values: 1-300 ft, increments of 1 ft

Recommended cable length is 25, 50, 75, or 100 ft (8, 15, 23, or 31 m); maximum length is 1000 ft (300 m).
 
Order the 19154 if the -PH phone modem kit was ordered with the ET107 and the phone will be used in the United Kingdom. Customers can change the configuration for use in other countries. Refer to the COM220 manual for more details.
20586
 
The 20586 is a 1 W, 900 MHz Spread Spectrum Radio Kit used with our ET107 weather stations. For the computer site, the kit contains an RF450 radio, 15966 ac transformer, 10873 RS-232 cable, and 20644 dipole antenna. For the field site, the kit contains another RF450 radio, 14241 antenna cable, and 18290 adjustable inclination mount. The PS24 power supply is recommended when using spread spectrum radio telemetery with a solar-powered ET107 Weather Station (see below).
14205
 
The 14205 is a high-gain (6 dBd), directional (Yagi) antenna for the 20586 Spread Spectrum Radio Kit. It is used outdoors. The 14205 has a narrow beam width that requires precise aiming. Its higher gain makes it useful for communicating over longer distances.
 
The 19256 includes the hardware required to mount a cellular phone modem inside of an ET107 enclosure. The cellular phone and antenna are not included (see below).
RAVENXTV
 
The Airlink RavenXTV is a cellular modem that can be used with the 19256 kit (see above). This full-duplex modem is configured for Verizon cellular networks. It transmits data to the local cellular tower using a Code Division Multiple Access (CDMA) network. The data is sent from the tower to the base station computer via the Internet. The PS24 power supply is recommended when using a cellular modem with a solar-powered ET107 Weather Station (see below).
20679
 
The 20679 antenna is used for most ET107 stations that communicate via cellular modem. This dual-band omnidirectional antenna covers both the 800-MHz and the 1.9-GHz bands. For the 800-MHz band, the 20679 provides a 0-dBd gain. For the 1.9-GHz band, the 20679 provides a 3-dBd gain.
PS24
 
PS24 24Ah Power Supply w/10 x 12 Enclosure
 
This power supply is recommended when using a spread spectrum radio or cellular phone with a solar-powered ET107 station. The PS24 consists of a 24-Ahr sealed rechargeable battery, CH100 regulator, enclosure mounting bracket, and a 10" x 12" environmental enclosure. The enclosure has one conduit for cable entry. The PS24 is mounted to the ET107 pole via the 18520 hanger mounting kit (see below).
Charging Regulator Option
-NC -NC No Charging Regulator
-C1 -C1 w/CH150
-C2 -C2 w/CH200
Enclosure Mounts Option
-NM -NM No Enclosure Mounting
-MM -MM Tripod Mast Mounting
-LM -LM CM1xx Leg Mounting
-TM -TM Tower Mounting
-PM -PM Pole Mounting, 4-10in
-EM -EM ET Pole Mounting, 3in
 
The 18520 hanger mounting kit is required to mount the PS24's enclosure to the ET107's pole.
29354
 
The 29354 is a wireless networking peripheral that provides Wi-Fi connectivity over standard 802.11b/g/n networks. It is a low-power device that offers unique and powerful PakBus networking capabilities, but it is easy to configure.
 
Used with our ET stations, the 16902 supports spread-spectrum radio communication in the US and Canada. Hardware provided for the computer site includes an RF401 100 mW spread-spectrum radio, 15966 ac transformer, 10873 RS-232 cable, and 15970 dipole antenna. Hardware for the field site includes an RF401 radio, 14241 antenna cable, and CM230 adjustable-inclination mount. The antenna for the field site is ordered separately.
 
The 32453 kit is used with our ET stations to provide license-fee 868 Mhz wireless serial communications in Europe. The RF422 radio included in the radio kit transmits data at 10 kbps with a maximum power of 25 mW. The radio employs listen-before-talk (LBT) and adaptive-frequency-agility (AFA) to provide a robust link of up to 5 km (line-of-sight). The RF422 supports point-to-point and point-to-multipoint datalogger communications.

Replacement Parts

10070
 
The 10070 Enclosure RH Sensor measures the relative humidity inside of the ET107's enclosure. This measurement helps the customer know when the the desiccant needs to be replaced.
 
The 19442 may be purchased to replace the CR1000M module originally contained in the ET107. The CR1000M provides sensor measurement, timekeeping, data reduction, data/program storage and control functions. The 19442 provides 4 MB of memory for data and program storage.
6182
 
The 6182 consists of a 7 Ah sealed rechargeable battery, leads, and a connector.
HMP60-ETS
 
The HMP60-ETS is the replacement temperature and relative humidity sensor for newer ET107 stations. The HMP60-ETS includes an adapter that allows the sensor to fit in a MetSpec radiation shield. The MetSpec radiation shield has wingnuts on the bottom of the shield. If there are no wingnuts, the appropriate replacement sensor for your ET107 station is the HMP60-ETR (see below).
 
The HMP60-ET is the replacement temperature and RH sensor for older ET stations. The sensor's cable terminates in a connector and is the ideal length for attachment to the ET107 or ET106 ETo Weather Station.
CS305-ETM
 
The CS305-ETM is the pyranometer and leveling mount included with the ET107. The pyranometer is fitted with a 40" cable that terminates in a connector for attachment to the ET107. The CS305-ETM measures total sun and sky solar radiation using a silicon photocell.
TE525-ET
 
The TE525-ET is the tipping bucket raingage included with the ET107. It has a 6" orifice and a 55" cable that terminates in a connector for attachment to the ET107. The TE525-ET measures in 0.01" increments.
034B-ETM
 
The 034B-ETM is the wind set and mount included with the ET107 when option -MW is chosen. This wind set combines a 3-cup anemometer and vane into a single integrated package. Its cable terminates in a connector and is the ideal length for attachment to the ET107 ETo Weather Station.
WINDSONIC1-ETM
 
The WindSonic1-ETM is the ultrasonic anemometer and mount included with the ET107 when option -GW is chosen. This anemometer does not have moving parts, which minimizes routine maintenance. It outputs an RS-232 signal that the ET107's on-board CR1000 can measure. The cable terminates in a connector and is the ideal length for attachment to the ET107.
10589
 
The 10589 provides the short haul modem kit included with the ET107 when option -SH is chosen. It enables local communication between the ET107 and a computer RS-232 serial port. The kit consists of two RAD modems, a 10596 interface, a surge protector for the computer, a cable burial splice kit, and three cables.
10585
 
The 10585 provides the phone modem kit included with the ET107 when option -PH is chosen. It enables communication between the station and a computer equipped with a Hayes-compatible modem over a public switched telephone network. The kit consists of a COM220 telephone modem, a 20-ft cable allowing attachment to the enclosure, burial splice kit for attachment to a phone line, and a patch cord to connect the COM220 to the RJ11C telephone jack. The COM220 is programmed for use in the US or Canada. Refer to the 19154 other accessory if you are in the UK.
CS305-ET
 
The CS305-ET provides the ET107's pyranometer but not the leveling mount.
034B-ET
 
The 034B-ET provides the wind set but not the mount.
WINDSONIC1-ET
 
The WindSonic1-ET provides the ultrasonic anemometer but not the mount.