TS100SS
TS100SS
OrderableAspirated Radiation Shield
Overview
The TS100SS, manufactured by Apogee Instruments, Inc., is a fan-aspirated radiation shield that minimizes temperature-measurement errors caused by incident solar radiation. The unique aerodynamic shape and rugged, low-power fan make it the first research-grade fan-aspirated shield that is practical for use on battery- or solar-powered stations. The shield provides excellent sensor protection and accommodates various combinations of thermistors, PRTs, and humidity sensors using one of the sensor port adapter plugs.
Typical applications include air temperature and humidity measurements in weather networks, often for weather forecasting, and solar energy sites. Fan-aspirated shields are also important in the precise measurement of air temperature and humidity gradients above the land surface and in climate change monitoring.
Key Advantages
With a low-powered solution
Benefits
- Low-powered fan suitable for solar-powered systems
- Aerodynamic design for continuous operation in high winds
- Logger-controlled fan speed for power reduction to < 25 mA
Specifications
- Difference among Individual Replicate Shields
- < 0.1°C
- Aspiration Rate
- 6 m/s
(at full speed)
3 m/s(at half speed)
- Fan Input Voltage Requirement
- 10.8 to 13.2 Vdc
- Fan Current Drain
- 80 mA
(at full speed)
25 mA(at half speed)
- IP Rating
- IP55
- Warranty
- 4 years
(against defects in materials and workmanship)
- Diameter
- 27 cm
(10.63 in.)
- Height
- 22 cm
(8.66 in.)
- Weight
- 840 g
(29.6 oz)
Accessories
(5)35866
TS100SS Port Adapter for the HMP60 and HMP110
Orderable35867
TS100SS Port Adapter for the HygroVue 5 or TempVue Sensors
Orderable36498
TS100SS Port Adapter for the 107, 108, 109, and 109SS
OrderableCABLE6PIN
26 AWG Six-Conductor Cable with M8 Six-Pin V-Coded Pin (Male) Connector
Orderable39131
DIN Rail Terminal Kit with 2 Terminals and 6 Wires
Orderable
Common Accessories
(5)35866
TS100SS Port Adapter for the HMP60 and HMP110
An adapter is needed for each TS100SS. The 35866 is one option. The 35866 is an adapter plug that allows an HMP60 or HMP110 Air Temperature and Relative Humidity Sensor to fit inside the TS100SS.
Orderable35867
TS100SS Port Adapter for the HygroVue 5 or TempVue Sensors
An adapter is needed for each TS100SS. The 35867 is one option. The 35867 is an adapter plug that allows the HygroVUE™5 Digital Temperature and Relative Humidity Sensor to fit inside the TS100SS.
Orderable36498
TS100SS Port Adapter for the 107, 108, 109, and 109SS
An adapter is needed for each TS100SS. The 36498 is one option. The 36498 in an adapter plug that allows a 107, 108, 109, or 109SS temperature probe to fit inside the TS100SS.
Orderable39131
DIN Rail Terminal Kit with 2 Terminals and 6 Wires
The 39131 provides the needed DIN rail terminals, separator, and wires to connect any product to a data logger or other peripheral that requires six wires for connection. This kit provides the following wires: black, light blue, green, red, white, and clear. The color-coding of these wires matches the wire coloring of the product for ease in connection, maintenance, and troubleshooting.
OrderableCABLE6PIN
26 AWG Six-Conductor Cable with M8 Six-Pin V-Coded Pin (Male) Connector
The CABLE6PIN is a cable assembly with an M8 six-pin V-coded connector on one end and flying leads on the other end. All six pins and the shield are presented as flying leads with ferrules. The six-pin connector is weatherproof and suitable for harsh environmental conditions.
Orderable
Replacement Parts
(5)35732
Replacement Fan for Aspirated Shield
The 35732 replacement fan can be purchased to replace a damaged fan in the TS100SS. The fan comes with an IP68 marine-grade stainless-steel cable connector and four nylon anchoring screws.
Orderable34136
5/16-18 x 2.0 Stainless-Steel V-Bolt with 2 Silicon Bronze Nuts
The 34136 is a replacement stainless-steel V-bolt with silicon bronze nuts used for mounting. The 34136 may be ordered to replace the original if it was damaged or lost.
Orderable4365
Stainless-Steel Flat Washer 5/16
This flat 5/16" washer can be purchased to replace a lost or damaged washer.
Orderable4366
Stainless-Steel Lock Washer 5/16
This lock washer may be purchased to replace a lost or damaged washer.
Orderable18126
5/16-18 Silicon Bronze Nut
This 5/16" nut can be purchased to replace a lost or damaged nut.
Orderable
Ships With
(6)- U-Bolt Mount from original mfg (Use pn 34136 as replacement.)
35867
TS100SS Port Adapter for the HygroVue 5 or TempVue Sensors
Orderable- Washers from original mfgQty 2
- Bolts from original mfgQty 2
- Cable Mount Ties from original mfgQty 2
- Zip Ties from original mfgQty 2
Similar Products
(1)
Compatibility
If you would like to use the TS100SS with sensors that are different from those listed in the table, please contact Campbell Scientific directly to discuss compatibility.
