CPEC200

Name: CPEC200
Brand: Campbell Scientific
SKU: 27140
Availability: Discontinued

Closed-Path Eddy-Covariance System

CPEC200

Retired

Closed-Path Eddy-Covariance System

No longer available to order

This product is retained for service, documentation, and compatibility information.

Replaced by

CPEC310
Expandable Closed-Path Eddy-Covariance System with EC155, Pump Module, and Automatic Zero and Span

Model:: CPEC200
Item Number:: 27140
Warranty:: 1 year

Overview

The CPEC200 is a turn-key, closed-path eddy-covariance (EC) flux system for long-term monitoring of atmosphere-biosphere exchanges of carbon dioxide, water vapor, heat, and momentum. A complete system consists of a closed-path gas analyzer (EC155 closed-path gas analyzer), sonic anemometer (CSAT3A sonic anemometer), data logger (CR3000 datalogger), and sample pump. A valve module is also available for automated zero and span.

The gas analyzer’s intake design and small sample cell volume (5.9 mL) provide excellent frequency response (4.3 Hz cutoff frequency) with low total system power (12 W). Additionally, the vortex intake (United States Patent No. 9,217,692) greatly reduces maintenance and maintains frequency response compared to traditional inline filters.

Key Advantages

Turn-Key System
Nearly maintenance-free with the vortex intake and auto zero/span

Technical Description

The gas analyzer’s small sample cell volume (5.9 ml) minimizes the sample residence time (50 ms at the system’s nominal flow rate, 7 LPM). This gives excellent frequency response (5.8 Hz half-power bandwidth) with low total system power (12 W).

Eddy-Covariance Measurements

CO₂ and H₂O are measured with an EC155 Closed-Path Gas Analyzer. Three-dimensional wind speed and sonic air temperature are measured with a CSAT3A sonic anemometer head.

CPEC200 System Enclosure

A 16 in. by 18 in. fiberglass enclosure houses the data logger, optional data storage peripheral, optional valve module, and the electronics that interface with the CPEC200 pump module. The CPEC200 system enclosure can be mounted to a tripod mast, CM106 tripod leg base, tower legs, or a large diameter pole.

CPEC200 Pump Module

The pump module, a standard component of the CPEC200 system, consists of a small dual-head diaphragm pump with a brushless DC motor mounted inside a fiberglass enclosure. An integral cable connects the pump module to the CPEC200 system enclosure, which provides power, temperature measurement and control, pressure measurement, and pumping speed measurement and control.

Valve Module (Optional)

Campbell Scientific offers two valve module versions. The basic three-valve module (pn 27559) enables the CPEC200 system to automatically perform zero, CO₂ span, and H₂O span measurements. The six-valve module (pn 26578) includes three additional valves to allow more CO₂ span tanks to be measured. The valve module is housed inside the CPEC200 system enclosure. The outlet of the manifold has a proportional valve to automatically control the flow of zero/span gas.

Scrub Module (Optional)

A scrub module (pn 27423) is available for the CPEC200 which provides a zero air reference source for the CPEC200 without the need for an extra cylinder which can be useful in remote applications. The CPEC200 scrub modules pulls ambient air through three bottles of molecular sieve, effectively scrubbing CO₂ and water vapor from ambient air to produce the reference zero. The scrub module and its small diaphragm pump are housed within a weather-tight fiberglass enclosure which is compatible with a variety of mounting options.

Note: Contact the Campbell Scientific Micromet group for questions or updates regarding the data logger program.

Benefits

Fully integrated system with all the plumbing
Low-power operation
Excellent frequency response
Optional automatic zero and span

Specifications

Operating Temperature Range: -30° to +50°C
Input Voltage Range: 10.5 to 16.0 Vdc
Power: 12 W
(typical)
35 W
(maximum, at cold startup)

System Enclosure

Dimensions: 52.1 x 44.5 x 29.7 cm
(20.5 x 17.5 x 11.7 in.)
Weight: 11.6 kg
(25.5 lb) for basic system
1.6 kg
(3.7 lb) for CR3000
154 g
(5.4 oz) for CFM100/NL116
1.5 kg
(3.3 lb) for three-valve module
1.9 kg
(4.2 lb) for six-valve module

Pump Module

Inlet Connection: 3/8-in. Swagelok
Pumping Speed: 3 to 9 LPM
(automatically controlled at the setpoint, typically 7 LPM)
Pressure Sensor Range: 15 to 115 kPa
Cable Length: 3.0 m
(10 ft)
Dimensions: 35.6 x 29.2 x 13.5 cm
(14.0 x 11.5 x 5.3 in.)
Weight: 5.4 kg
(11.8 lb) without mounting bracket