CR350 OEM

CELLDATA

Campbell Scientific Cellular Data Service Subscription

39580

32 GB USB Flash Drive

18663

ENC8/10

CELLDATA

Campbell Scientific Cellular Data Service Subscription

At Campbell Scientific, we offer subscriptions to cellular data plans to be used with our RV50 modems, the cellular modems built into our CR300 and CR310 dataloggers, and our CELL200-series cellular modules (CELL205, CELL210, CELL215, CELL220, CELL225). Modems are provisioned and activated when you receive them. A subscription to cellular data service is available to those who purchase cellular-enabled devices. When ordering a cellular-enabled product, you can choose the Data Provisioning option to subscribe to Campbell Scientific Cellular Data Services. By doing so, the modem will be provisioned and activated to work on a selected carrier. When ordering a provisioned device, also choose a data plan. The annual subscription cost is based on the data plan and selected carrier. Data plans are available from 25 MB per month to 5 GB per month.

39580

32 GB USB Flash Drive

The 39580 is a 32 GB mass storage device used to move data files from a CR350 Measurement and Control Datalogger in the field to a computer with a USB Type-A or USB Type-C interface. It is not intended to be left connected to the data logger for long-term local-memory purposes.

18663

Null Modem Cable, 9-Pin PIn (Male) to 9-Pin Pin (Male)

The 18663 is needed to connect serial modems such as a cell phones. This 1 ft, null modem cable has 9-pin connectors on both ends for connecting the data logger's RS-232 port to a peripheral's RS-232 port. An interface such as the SC105 or SC932A is typically not required.

ENC8/10

Weather-Resistant Enclosure, 8 x 10 inches

The ENC8/10 is a weather-resistant enclosure that is 8 inches wide and 10 inches tall. It is the smallest of our standard enclosures, yet it is extra deep with a depth of 6 inches. This enclosure is suitable for use with CR300-series or CR200X-series dataloggers. The ENC8/10 can house one of these data loggers and a small power supply. Alternatively, this enclosure can be used to mount a communication or measurement peripheral without a data logger.

BP7

7 Ah 12 V Sealed Rechargeable Battery

The BP7 is a 12 Vdc, 7 Ah rechargeable battery typically used with a CR6 or CR300-series datalogger. It consists of a sealed rechargeable battery, battery cable, and a mounting bracket. The cable terminates in stripped and tinned leads that attach to the onboard regulator of your CR6 or CR300-series datalogger.

39177

1.67 A 24 Vdc Power Supply

The 39177 converts 100 to 240 Vac to a regulated 24 Vdc. The 39177 comes standard with a USA/Canada plug, with an option to add a kit for international use. On one end, the 39177 has a plug that inserts into a wall socket. There are several cable termination options for the other end of the cable.

16755

2.4 GHz 13 dBd Yagi Enclosed Antenna with Mounting Hardware

This antenna may be used with the -WIFI option. The 16755 is a high-gain (13 dBd), directional (Yagi) antenna used with our 2.4 GHz radio transceivers. It is intended for longer distances, and for communicating to one other station (due to narrow beam width).

30411

2.4 GHz 5.8 dBd Omnidirectional Fiberglass Antenna without Mounting Hardware

This antenna may be used with the -WIFI option. The 30411 is a 5.8 dBd omnidirectional antenna for use with our 2.4 GHz spread-spectrum products. The 30411 is suitable for base-station use where communication is needed with multiple stations located in different directions. It is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line of sight. Mounting hardware is not included.

15730

900 MHz 0 dBd 1/4 Wave Omnidirectional Antenna with RPSMA Connector

This antenna may be used with a 900 MHz radio. The 15730 is a 900 MHz, unity gain (0 dBd), 1/4 wave whip, right-angle antenna. The 15730 is an omnidirectional antenna that attaches directly to the product (no cables). It should be used inside an enclosure or building.

14201

900 MHz 9 dBd Yagi Antenna with Mounting Hardware

This antenna may be used with a 900 MHz radio. The 14201 is a high-gain (9 dBd), directional (Yagi) antenna. It is useful for making RF links over longer distances in one direction. This antenna is typically used with sub-315 mW radios such as the RF401A. The 14201 requires an antenna cable to connect it to the spread-spectrum transceiver.

14221

900 MHz 3 dBd Omnidirectional Antenna with Mounting Hardware

This antenna may be used with a 900 MHz radio. The 14221 is a 3 dBd omnidirectional antenna for use with many of our spread-spectrum products. The 14221 is suitable for base station use where you need to communicate with multiple stations located in different directions. It is also preferred in mobile applications and in other applications in which the best radio path is not constant, including close-up applications without clear line-of-sight.

38485

4G/3G 9 dBi MIMO Cellular Antenna with 2 Type N Socket Connectors

This antenna may be used with the -CELL205 option. The 38485 antenna is a wideband, dual-port, directional-panel antenna with slant 45 polarization that covers US LTE700/Cellular/PCS/AWS/MDS and global GSM900/GSM1800/UMTS/LTE2600 bands. The antenna is ideal for both indoor and outdoor applications. It includes a UV-stable radome enclosure that provides years of use without degradation to either mechanical properties or aesthetics.

32256

4G/3G Cellular Whip Antenna with SMA Connector

This antenna may be used with the -CELL205 option. The 32256 is a wide-band termination antenna with SMA connector and articulating base. It has a high-efficiency response on nearly all 4G, 3G, and 2G frequency bands and is, therefore, primarily used with cellular gateways and routers, such as the RavenXTV or RV50. This small, low-cost antenna is typically used in applications where antenna gain is not required to maintain a strong cellular link. For a cellular product that offers both primary and diversity antenna connections (such as the RV50), use two of these antennas.

32262

2 dBd 4G/3G Multiband Omnidirectional Antenna with Mounting Hardware

This antenna may be used with the -CELL205 option. The 32262 is an omnidirectional antenna with mounting bracket that is ideally suited for use with 4G and 3G cellular gateways. The mounting bracket attaches to a mast or crossarm, and it serves as the antenna ground plane. The antenna has an N type (female) threaded permanent stud for easy mounting to the included bracket or through an enclosure wall. A coaxial cable, sold separately, is required to connect this antenna to the inline surge suppression or radio antenna jack.

31182

27 dBi GPS Antenna with 3 V Magnetic Mount and SMA Connector

The 31182 is a magnetic mount GPS patch antenna. It is typically used where GPS reception is readily available and concern is low for snow buildup completely covering the antenna. The 31182 is also commonly used in cost-sensitive applications or applications that require a small-sized, low-profile antenna. This antenna connects to a GPS receiver with SMA connector, such as that found in the AL200, LS300G, TX320, and WEATHERPAK®M. The antenna package is waterproof and corrosion resistant. The 31182 conveniently mounts to any magnetic surface, which includes the 30626 and CM235 mounts offered by Campbell Scientific.

21847

Cellular Phone Antenna Cable, Type N Pin (Male) to SMA

This cable is needed for use with non-whip cellular antennas. The 21847 is a 12 ft LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and an SMA connector on the other end.

COAXRPSMA

LMR195 Antenna Cable with Reverse Polarity SMA and Type N Pin (Male) Connector

This cable may be used with non-whip 900 MHz antennas. The COAXRPSMA is an LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and a Reverse Polarity SMA (RPSMA) pin (male) connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a spread-spectrum radio with an RPSMA connector.

COAXNTN

RG8 Antenna Cable with 2 Type N Pin (Male) Connectors

This cable may be used with non-whip 900 MHz antennas or non-whip cellular antennas. The COAXNTN consists of an RG8/U, low-loss coaxial cable fitted with a Type N pin (male) connector on each end. It can support any 50 ohm transmission line application.

COAXSMA

LMR195 Antenna Cable with SMA and Type N Pin (Male) Connector

This cable may be used with non-whip cellular antennas. The COAXSMA is an LMR195 coaxial cable fitted with a Type N pin (male) connector on one end and an SMA connector on the other end. This cable is commonly used to connect an antenna with Type N connector to a cellular or spread-spectrum radio with an SMA connector.

31314

Surge Protection Kit, Type N to RPSMA, 700 to 2700 MHz

This kit may be used with COAXNTN-L with a 900 MHz antenna. The 31314 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an RPSMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes: Bi-directional coaxial RF protector with hardware, suitable for 700 to 2700 MHz Flange mounting bracket 18 in. Type N to RPSMA coaxial jumper 24 in. ground wire assembly

31317

Surge Protection Kit, Type N to SMA, 700 to 2700 MHz

This kit may be used with COAXNTN-L with a cellular antenna. The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes: Bi-directional coaxial RF protector with hardware, suitable for 700 to 2700 MHz Flange mounting bracket 18 in. Type N to SMA coaxial jumper 24 in. ground wire assembly

21212

Black Cold Shrink Tape

The 21212 is a 10-ft roll of black self-vulcanizing tape. This cold shrink tape can help protect antenna connections in RF, cellular, or satellite networks.