34344
34344
OrderableMetSens or WINDSONIC Stand Mount
Overview
The 34344 is a mounting kit for the MetSens series of compact weather sensors. The kit can be installed on a vertical pipe or mast, or on a horizontal crossarm less than 6.35 cm (2.5 in.) in diameter. The kit includes a mounting stand and three pan truss screws, which are used to attach the following: the MetSens sensor; two 5/16 x 3.0 in. carriage screws; and two sets of wing nuts, washers, and lock washers.
The 34344 mounting kit is compatible with the CM110, CM106B, and CM300 series of tripod masts; the UT10, UT20, and UT30 universal tower masts; the CM202, CM203, CM204, and CM206 crossarms; and the CM410 mounting arm. The 34344 mounting kit can also be used as a replacement mount for any WINDSONIC 2-D sonic wind sensor.
Specifications
- Dimensions
- 18.09 x 10.8 x 8.76 cm
(7.12 x 4.25 x 3.45 in.)
- Weight
- 0.59 kg
(1.3 lb)
Replacement Parts
(6)34345
#8-32 x .437 304 Stainless-Steel Pan Truss Phillips Passivated Screw
The 34345 is the replacement screw for the 34344. Three screws per mount are required.
Orderable27550
Captive Mast Clamp
The 27550 is the replacement clamp for the 34344.
Orderable27551
5/16-18 x 3.00 Stainless-Steel Carriage Screw
The 27551 is a 5/16-18 x 3.0-in. stainless-steel bolt. It is used to mount the 34344 to a vertical pipe (or horizontally). Each bolt also requires a 27552 wing nut.
Orderable27552
5/16-18 Brass Wing Nut
The 27552 is a 5/16-18 wing nut. Two of the 27522 nuts are used with two of the 27551 and a single 27550 mast clamp to secure the 34334 mount to a vertical or horizontal crossarm.
Orderable4365
Stainless-Steel Flat Washer 5/16
This flat 5/16" washer is shipped with many mounts including the 34344. The 4365 can be purchased to replace a lost or damaged washer.
Orderable4366
Stainless-Steel Lock Washer 5/16
The 4366 may be purchased to replace a lost or damaged washer.
Orderable
Similar Products
(1)
Compatibility
Compatible Products
(19)MetSens200
Compact Weather Sensor for Wind with Compass
OrderableNotes—MetSens300
Compact Weather Sensor for Temperature, RH, and Barometric Pressure
OrderableNotes—MetSens500
Compact Weather Sensor for Temperature, RH, Barometric Pressure, and Wind with Compass
OrderableNotes—MetSens550
Compact Weather Sensor for Temperature, RH, Barometric Pressure, and Wind with Precipitation Connector and Compass
OrderableNotes—CM110
10 ft Stainless-Steel Tripod with Grounding Kit
OrderableNotes—CM106B
7 to 10 ft Galvanized-Steel-Tubing Tripod with Grounding Kit
OrderableNotes—CM300
23 in. Mounting Pole with Cap
OrderableNotes—CM305
47 in. Mounting Pole with Cap
OrderableNotes—CM310
56 in. Mounting Pole with Cap
OrderableNotes—UT10
10 ft Tower with Base, Adjustable Mast, and Grounding Kit
OrderableNotes—UT20
20 ft Universal Tower with Adjustable Mast
OrderableNotes—UT30
30 ft Universal Tower with Adjustable Mast
OrderableNotes—CM202
2 ft Crossarm with One CM210 Mounting Kit
OrderableNotes—CM203
3 ft Crossarm with One CM210 Mounting Kit
OrderableNotes—CM204
4 ft Crossarm with One CM210 Mounting Kit
OrderableNotes—CM206
6 ft Crossarm with One CM210 Mounting Kit
OrderableNotes—WINDSONIC1
2-D Sonic Wind Sensor with RS-232 Output
OrderableNotes—WINDSONIC4
2-D Sonic Wind Sensor with SDI-12 Output
OrderableNotes—CM410
Pile Mount Arm (no finish or matte black finish)
OrderableNotes—
