CM204

CM210

Crossarm-to-Pole Mounting Kit

CM345

Large Pole to Mast or Crossarm Adapter Kit

CMB200

Crossarm Brace Kit

17953

1- x 1-in. Nu-Rail Crossover Fitting

This NU-RAIL® crossover fitting is used to mount a sensor with a 1.0" IPS mounting pipe (typically a wind sensor) to the crossarm. It provides equivalent functionality as the CM220 Right Angle Mounting Bracket.

1049

3/4 x 1 in. Nu-Rail Crossover Fitting

This NU-RAIL® crossover fitting is used to mount a sensor with a 0.75" IPS mounting pipe (typically a wind sensor) to the crossarm. It provides equivalent functionality as the CM220 Right Angle Mounting Bracket.

CMB200

Crossarm Brace Kit

The CMB200 Crossarm Brace Kit is designed to provide additional stability to the CM204 crossarm mounted on Campbell Scientific tripods and towers. This kit provides support for crossarms with heavier or sensitive sensor loads, as well as added stability in higher winds. Each kit includes one brace arm and three sets of mounting brackets.

CM221

Right-Angle Mounting Kit

The CM221 mounts a pipe or tube at 90° to another pipe or tube. It is typically used to attach a sensor with a vertical pipe (including most wind sensors) to a crossarm. The cast aluminum, right-angle mounting bracket has 3.8 cm (1.5 in.) U-bolts and hardware and will accommodate tubing with a 1- to 1.5-in. outer diameter.

CM230

Adjustable Inclination Mounting Kit

The CM230 Adjustable Inclination Mount secures a directional (Yagi) antenna or a sensor that must be pointed at a specific target (e.g., SI-111, SR50A) to the CM204.

CM225

Solar Sensor Mounting Stand

The CM225 can attach one pyranometer or quantum sensor to the CM204 crossarm.

CM235

Magnetic Mounting Stand

The CM235 can attach one peripheral with a magnetic base to the CM204 crossarm. Devices that have a magnetic base include our GPS16X-HVS Geographic Position Receiver, GPS antennas, and some short-range omnidirectional antennas.

CM210

Crossarm-to-Pole Mounting Kit

The CM210 is included with our CM204 crossarm. An additional CM210 may be useful if the CM204 will be mounted on a tower. The additional CM210 allows the crossarm to be secured to two of the three vertical risers within the tower.

41003-5

10-Plate Solar Radiation Shield

This 10-plate Gill radiation shield accommodates one HMP45C probe. The shield's louvered construction allows air to pass freely through the shield thereby keeping the probe at or near ambient temperature.

41303-5A

6-Plate Solar Radiation Shield

This 6-plate Gill radiation shield accommodates one 107, 108, or HMP60 probe. The shield's louvered construction allows air to pass freely through the shield thereby keeping the probe at or near ambient temperature.

RAD06

6-Plate Solar Radiation Shield

The RAD06 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion. It also has lower self-heating in bright sunlight combined with higher temperatures (> 24°C (~75°F)) and low wind speeds (< 2m/s (~4.5 mph)), providing a better measurement.

RAD10E

10-Plate Solar Radiation Shield for Larger Sensors

The RAD10E uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion.

RAD14

14-Plate Solar Radiation Shield

The RAD14 uses a double-louvered design that offers improved sensor protection from driving rain, snow, and insect intrusion.

CM345

Large Pole to Mast or Crossarm Adapter Kit

The CM345 is an adapter to mount a vertical 1 to 2.5 in, pipe (1.315 to 2.875 in. OD) or a 1 in, horizontal pipe (1.315 in. OD crossarm) to a large pole with a 20.32 to 53.34 cm (8 to 21 in,) diameter. By using this adapter with a vertical mast or crossarm, you can mount other standard Campbell Scientific gear to a larger pole. The vertical pipe clamps used are standard Unistrut clamps.

17492

Stainless-Steel U-Bolt Screw 5/16-18 x 2.125 with 2 Silicon Bronze Nuts

17446

Stainless-Steel U-Bolt Screw 5/16-18 x 1.500 with Silicon Bronze Nuts

4366

Stainless-Steel Lock Washer 5/16

4365

Stainless-Steel Flat Washer 5/16