RETIRED ›
This product is no longer available. Some accessories, replacement parts, or services may still be available.
10437 CR700X OS7.2 with SDM and 2K Program Memory

Overview

The 10437 PROM allows the CR7 to be compatible with the SDM-INT8, SDM-SW8A, SDM-AO4, and SDM-CD16AC. It is the OS7-0:2 default option.

Read More

Images

Detailed Description

The 10437 PROM allows the CR7 to be compatible with the SDM-INT8, SDM-SW8A, SDM-AO4 and the SDM-CD16AC. It is the OS7-0:2 default option.

PROMs can be installed by the customer or at our factory; if factory-installed, an RMA (Returned Material Authorization) is required. List prices is for the PROM only. Please note that several units may be sent in on one RMA number. An additional service charge (one hour minimum) will be applied to each RMA.

Campbell Scientific strongly recommends that units sent to the factory go through a standard checkout. In most cases, Datalogger Recalibration and Extended Temperature Testing should also be considered.

Dataloggers can be sent to our factory for installation of a PROM upgrade.

Standard checkout of the unit following a PROM upgrade is strongly recommended; this process includes the technician confirming operation of the datalogger's Operating System and I/O channels by several methods and over the standard operating temperature range. Hourly charges apply.


Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Measurement and Control

Product Compatible Note
SDM-AO4A
SDM-CAN
SDM-CD16AC
SDM-CD16D
SDM-CD16S
SDM-CD8S
SDM-CVO4
SDM-INT8 (retired)
SDM-IO16 Output only
SDM-SIO1 (retired)
SDM-SIO4 (retired)
SDM-SW8A

Additional Compatibility Information

This PROM allows the CR7 to be used with Synchronous Devices for Measurement (SDM).

Privacy Policy Update

We've updated our privacy policy.  Learn More