The 092, manufactured by Met One, is a barometric pressure sensor that is commonly used with the WMS100 for wind-farm power performance measurements. It has a polycarbonate casing and a metal weather shield, so it is rugged and weatherproof. You can use it indoors or outdoors, and it provides digital and analog outputs.
|Measurement Description||Barometric pressure|
|Signal Type/Output||Analog voltage|
|-NOTE-||1 hPa = 1 mBar|
|Pressure Range||600 to 1100 hPa|
|Elevation||Sea level to 3048 m (10,000 ft)|
|Long-Term Stability||±1.0 hPa in 1 year|
|Analog Output||0 to 1 Vdc, 0 to 2 Vdc, 0 to 2.5 Vdc, or 0 to 5 Vdc (Analog output automatically adjusts from zero to full scale for range selected.)|
|Digital Output||RS-232, RS-485, and SDI-12|
|Digital Protocol||ASCII Terminal Mode, RTU for RS-232 and RS-485|
|Baud Rates||1200, 2400, 4800, 9600, 19.2k bps|
|Current Consumption||10 mA @ 12 Vdc (typical)|
|Power Range||6 to 16 Vdc|
|Temperature Range||-40° to +55°C|
|Elevation||~609.6 m (2,000 ft) below sea level (as in a mine) to 3,657.6 m (12,000 ft) above sea level|
|Dimensions||12.0 x 8.0 x 5.5 cm (4.72 x 3.14 x 2.16 in.)|
|Weight||250 g (8.8 oz)|
Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.
The 092 includes in a small polycarbonate enclosure with metal weather shield. It may be mounted outside or inside a building
Number of FAQs related to 092-L: 3
Expand AllCollapse All
Most Campbell Scientific sensors are available as an –L, which indicates a user-specified cable length. If a sensor is listed as an –LX model (where “X” is some other character), that sensor’s cable has a user-specified length, but it terminates with a specific connector for a unique system:
If a sensor does not have an –L or other –LX designation after the main model number, the sensor has a set cable length. The cable length is listed at the end of the Description field in the product’s Ordering information. For example, the 034B-ET model has a description of “Met One Wind Set for ET Station, 67 inch Cable.” Products with a set cable length terminate, as a default, with pigtails.
If a cable terminates with a special connector for a unique system, the end of the model number designates which system. For example, the 034B-ET model designates the sensor as a 034B for an ET107 system.
Not every sensor has different cable termination options. The options available for a particular sensor can be checked by looking in two places in the Ordering information area of the sensor product page:
If a sensor is offered in an –ET, –ETM, –LC, –LQ, or –QD version, that option’s availability is reflected in the sensor model number. For example, the 034B is offered as the 034B-ET, 034B-ETM, 034B-LC, 034B-LQ, and 034B-QD.
All of the other cable termination options, if available, are listed on the Ordering information area of the sensor product page under “Cable Termination Options.” For example, the 034B-L Wind Set is offered with the –CWS, –PT, and –PW options, as shown in the Ordering information area of the 034B-L product page.
Note: As newer products are added to our inventory, typically, we will list multiple cable termination options under a single sensor model rather than creating multiple model numbers. For example, the HC2S3-L has a –C cable termination option for connecting it to a CS110 instead of offering an HC2S3-LC model.
Many Campbell Scientific sensors are available with different cable termination options. These options include the following:
Note: The availability of cable termination options varies by sensor. For example, sensors may have none, two, or several options to choose from. If a desired option is not listed for a specific sensor, contact Campbell Scientific for assistance.