The 17648 is a USB cable for attaching our products to a USB port on a PC. It has a type A pin (male) connector for connecting to the PC's USB port and a type B connector for connecting to the Campbell Scientific device. Refer to the Compatibility information for a list of Campbell Scientific devices that use this cable.
|PC Connector||USB type A|
|Device Connector||USB type B|
|Cable Length||1.83 m (6 ft)|
|Weight||45.4 g (0.1 lb)|
This cable is used with the following devices:
Drivers are required to use this cable. The drivers are shipped with the devices (except the COM320) and can be downloaded from our website.
Windows USB driver for the COM320 are distributed with the Device Configuration Utililty. In the Device Configuration Utility, click on the link "install the device driver for the COM320" in the main body of text for the COM320.
Note: Device Configuration Utility 2.08 or newer is required to install drives and configure the COM320.
RF430 USB Drivers for the Windows operating system. 32 and 64 bit support for Windows 8, Windows 7, Windows Vista and Windows XP.
Note: Drivers should be loaded before plugging the RF430 into the computer.
Windows USB drivers for the CWB100 are installed via the Device Configuration Utililty. In the Device Configuration Utility, click on the link "install the device driver for the CWB100" in the main body of text for the CWB100.
Note: Driver must be installed before connecting the CWB100 to your computer.