Our full technical support staff does not monitor this forum. If you need assistance from a member of our staff, please submit your question from the Ask a Question page.


Log in or register to post/reply in the forum.
Question/Topic Posted By Replies
Transfer data to FTP server using Ethernet port AliRaza279 1
More simple way Makada 11
Connect Davis Cup Anemometer to CR100= quiqueapolo 2
How to fix Issue with Terminal in Cr200? Jorge A 0
use of &h for long variables kokihualpa 5
Loggers CR800/1000 after power break/disconnection don't save data and program JuAn 3
need for two commands in SDI12 string Shanks.J 3
Alarm when value max and or min Makada 0
CCFC Live Image Jumpy When Power On is Triggered Terrapin 1
SDI12 array dimensioned to 3 sets of data from the same Device Shanks.J 2
Server Settings Larry@UFL 0
T0A5 Header Customization ZMS 1
Splitting up a string Lights 1
Invalid or out of place instruction for "CheckAlarm" , "ComposeAlarmTime" and AlarmStatus(1) = alsNone #RD@2020 2
Making a 10-Minute table variable Public cellectronic 6
backup tables with schedule collection kokihualpa 1
Downloading high frequency data over a GSM network AbriSAEON 1
alias declaration syntax in CR1000 program kirving 6
Loggernet admin not reconnecting to device joe.orozco 1
CR300 OS Downgrading francesco.sabatini 4
skipped system scans kokihualpa 0
Cr1000x and CNR4 HMNIBIO 0
Invalid or out of place instruction for "CheckAlarm" , "ComposeAlarmTime" and AlarmStatus(1) = alsNone #RD@2020 0
How much current can the 5V pin on the CR6 CS I/O port supply? Anton 6
GPS16X-HVS / April 6, 2019 leap second issue GaryTRoberts 2
Using GPS to set clock once per day Anton 2
Terminal use and commands kokihualpa 1
Writing data from legacy CR1000 via RS232 or ethernet DaveMattey 2
FTP Setting - CR300 cell215 Magdy89 1
send string with serialoutblock kokihualpa 1