Tripods / CM10
RETIRED ›
This product is no longer available and has been replaced by: CM106B. Some accessories, replacement parts, or services may still be available.
CM10 10-foot Galvanized-Steel Instrument Tripod

Overview

The CM10 is a galvanized-steel tripod that provides measurement heights up to 10 feet (3 meters) and support for attached sensors and mounts, solar panels, and environmental enclosures. The tripod legs are individually adjustable allowing adjustment of our wind set's measurement height, and tripod installation over uneven terrain.

Read More

Benefits and Features

  • Support for meteorological sensors, hydrological sensors, sensor mounts, solar panels, environmental enclosures
  • Portable instrument mount
  • Lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties included

Images

Detailed Description

Constructed out of corrosion-resistant galvanized steel, the CM10 provides measurement heights of up to 10 ft (3 m). This general purpose instrument mount supports the attachment of sensors and mounts, solar panels, and environmental enclosures. Individually adjustable legs allow installation over uneven terrain. The CM10 includes lightning and grounding rods, grounding cables, grounding cable clamps, ground stakes, and UV-resistant cable ties. An optional guy kit to improve the CM10’s wind load rating is also available.

Specifications

Vertical Load Limit 45 kg (100 lb)
Mast 1.25 IPS (1.66 outer diameter)
Leveling Adjustment Slide collars on each leg adjust individually.
Portability Collapsible to 1.83-m length by 22.86-cm diameter (6-ft length by 9-in. diameter)
Leg Base 5.08 x 12.7 cm with 1.27-cm hole for ground stake (2 x 5 in. with 0.5-in. hole for ground stake)

Wind Load Recommendation

Sustained Wind Tolerance
  • 112.7 kph (70 mph) unguyed
  • 193.1 kph (120 mph) guyed
Gust Tolerance
  • 160.9 kph (100 mph) unguyed
  • 241.4 kph (150 mph) guyed

Compatibility

Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Mounting Equipment

Product Compatible Note
019ALU (retired)
CM202
CM202SS
CM203
CM204
CM204SS
CM206
UT018-5 (retired)

Additional Compatibility Information

Enclosure Brackets

The “-MM” mount option for our environmental enclosures is intended for mounting the enclosure to a tripod's mast. An enclosure ordered with this option will be shipped with a three-piece bracket mounted to the top of the enclosure and an identical three-piece bracket mounted to the bottom of the enclosure.

Privacy Policy Update

We've updated our privacy policy.  Learn More