31332 Surge Protection Kit, Type N to BNC, 100 to 512 MHz


The 31332 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with a BNC antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector. This kit includes:

  • RF protector with hardware, suitable for 100 to 512 MHz
  • Flange mounting bracket
  • 18 in. Type N to BNC coaxial jumper
  • 24 in. ground wire assembly

Note: For a pre-installed, bulkhead-mounted version of this same kit, see the 31330 Bulkhead Surge Protection Installed in Enclosure, Type N to BNC, 100 to 512 MHz.



Coaxial Jumper

Connector 1 Type N plug
Connector 2 BNC plug
Cable Type RG174/U
Length 45.7 cm (18 in.)


Performance Design Superior coil inductor surge performance design
Weatherproof Weatherproof when installed
Frequency 100 to 512 MHz
Connectors Type N jack
Mounting Bulkhead or flange mount
Operation DC block (RF only)
Insertion Loss < 0.1 dB
Maximum Surge
  • IEC 61000-4-5 8/20 μs waveform
  • 20 kA
Temperature -50° to +85°C
Standards CE compliant, RoHS compliant, IEC 60529 IP67, Bellcore #TA-NWT-000487
Type N Connector Length 2.41 cm (0.95 in.)
Dimensions 9.27 x 7.16 x 3.55 cm (3.65 x 2.82 x 1.40 in.)
Weight 226.8 g (0.5 lb)

Flange Mount

Material Aluminum with stainless-steel screws, nuts, and washers
Dimensions 3.81 x 2.54 x 2.85 cm (1.5 x 1.0 x 1.12 in.)

Ground Wire

Wire Type 12 AWG stranded with PVC jacket
Connector 5/8 crimp ring lug, soldered
Length 61 cm (24 in.)


Note: The following shows notable compatibility information. It is not a comprehensive list of all compatible or incompatible products.

Communication Devices

Product Compatible Note
RF300 (retired)
RF301 (retired)
RF302 (retired)
RF303 (retired)
RF304 (retired)
RF310 (retired)
RF312 (retired)
RF313 (retired)

Privacy Policy Update

We've updated our privacy policy.  Learn More