RF322
 
RF322 Ritron DTX-445 UHF Radio Programmed for ???.???MHz (411-429MHz)
 
Configuration Options - show details
-M1 -M1 Config for RF500M
With this option, the radio is configured to be used with the RF500M or RF310M modem. It also includes the interface cable that connects the radio to the radio modem.
-M2 -M2 Config for AL200
With this option, the radio is configured to be used with the AL200 ALERT2 Encoder Modulator and Sensor Interface. It also includes the interface cable that connects the radio to the AL200.
-M3 -M3 Config for RF500M-AL
With this option, the radio is configured to be used with the RF500M or RF310M modem. It also includes the interface cable that connects the radio to the radio modem. This option should be used with "Hybrid ALERT" systems, where one frequency is used for TD-RF and a second frequency is used for ALERT. The cable shipped with this option allows for frequency switching to occur.

Add to your Quote List


Product Details
Restockable Yes
Warranty 1 year
Compliance
Ships With
(1) Modem Interface Cable (specific pn of cable varies depending on option ordered)
(1) Mounting Bracket
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

31332
 
The 31332 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with a BNC antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.

Other Accessories

29276
 
The 29276 is a programming kit from Ritron. Campbell Scientific configures the radio to work with Campbell Scientific products using the FCC-assigned frequency. This kit is only required if the user needs to change the configuration.
13855
 
The 13855 Push-to-Talk Switch provides the customer with the ability to manually "key" the radio (cause it to transmit). This capability can prove useful while troubleshooting RF problems from site to site.
31330
 
The 31330 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with a BNC antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.

Replacement Parts

29201
 
The 29201 is the cable used to connect the radio to the RF500M radio modem. This cable comes attached to the radio.
31472
 
The 31472 is a cable used to connect an RF320-series radio to an RF500M or RF310M. This cable comes with the RF320-series radio ordered using the -M3 option. This cable differs from part 29201 in that it connects the frequency select pin on the modem to the frequency select pin on the radio. This feature is used in "Hybrid ALERT" networks where TD-RF communications occur on channel 7 and ALERT transmissions occur on channel 8.
29291
 
The 29291 cable is used to connect an AL200 ALERT2 Encoder Modulator to an RF320-series radio (Ritron DTX-L Series radio). It has stripped and tinned wires on one end for attaching to the AL200. The DB15 male connector on the other end connects to the RF320-series radio. The cable is approximately 15 inches in length, and it provides access to the radio's Power, Ground, Aux In, PTT, CS0, and PC PGM pins. This cable is included with an RF320-series radio ordered configured for use with the AL200
395
 
Four of these screws are used to attach the mounting bracket to the radio.
505
 
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
6044
 
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.