The RF313 is a rugged, narrowband UHF radio transceiver for customers with an FCC-assigned frequency in the range of 400 to 440 MHz. It is well-suited for Campbell Scientific RF networks. An FCC license is required.Read More
The RF310, RF312, and RF313 are narrowband UHF/VHF radio transceivers that provide a long-distance telemetry option for communicating with remote measurement stations. The three transceivers vary only by the frequency ranges they support:
The RF313 is programmed by Campbell Scientific to the frequency that was assigned by the Federal Communications Commission (FCC). This frequency must be specified at time of order so that it can be programmed into the radios.
A user-supplied antenna that matches the FCC-assigned radio frequency is required for each radio. Typically, the COAXNM-L coaxial cable is used to connect the antenna with the radio. One end of the COAXNM-L includes a male BNC connector that mates with the radio's BNC connector. The other end of the COAXNM-L includes a Type N Male connector that mates with the antenna's connector; the majority of VHF/UHF antennas terminate in a Type N Female connector.
Besides the radio, each field station and repeater station must also have an RF500M Radio Modem or RF310M Radio Modem; base stations need an RF500M modem, RF500B Base Station, or RF310B Base Station. The RF System brochure provides a complete list of equipment used in our field stations, repeater stations, and base stations.
|Frequency Error||±3.0 ppm|
|Frequency Deviation||Peak ±5.0 (12.5 kHz channel spacing)|
|Adjacent Channel Power||60 dB @ nominal conditions (12.5 kHz channel spacing)|
|Operating Temperature||-30° to +60°C|
|Weight||218 g (7.7 oz)|
RF Power Output (nominal)
|Standby||< 65 mA (muted)|
|Receiver||< 80 mA|
The RF313 does not work with other radio models.
Note: The CR200(X)-series dataloggers are only compatible if the RF500M radio modem is used.