Product Details
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image
Ships With
(1) 32559 TDR200 or SDM8X50 to Datalogger Cables, 15 in. and 12 in.
(1) 27555 USB 2.0 Cable, Type A Male to Micro B Male, 6/6.5 ft

Common Accessories

SDM8X50
SDM8X50-N
 
SDM8X50 8-Channel Solid State 50 Ohm Coax Multiplexer
 
show details
The SDM8X50 is a 50 ohm, coaxial, 8:1 multiplexer used in a TDR200-based system.
Enclosure Option
-N -N w/o Enclosure
-E -E w/10x12 Enclosure
COAXTDR-L
 
COAXTDR-L TDR Multiplexer Cable RG8 w/2 BNC Male Connectors
 
show details
The COAXTDR-L consists of a 50 ohm, low-loss, RG8 coaxial cable fitted with BNC male connectors on both ends. It attaches the Level 1 SDM8X50/SDMX50 to the TDR200 reflectometer.
Cable Length - show details
-L Pricing is in ft per TDR cable

Allowed values: 1-500 ft, increments of 1 ft

Cable length is user-specified.
CABLE5CBL-L
CABLE5CBL-L
 
CABLE5CBL-L 5-Conductor 22AWG Cable w/Drain
 
show details
The CABLE5CBL-L is a 22 AWG, five-conductor cable with a Santoprene jacket and an aluminum Mylar shield. By default, the conductors are stripped and tinned. The cable can also be fitted with a connector for attachment to a prewired enclosure.
CABLE5CBL-L Options - show details
-L Pricing is in ft per cable

Allowed values: 1-1000 ft, increments of 1 ft
Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the data logger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.

Other Accessories

13770
13770 TDR200/100 & SDM8X50/SDMX50 Interconnect Cable, 18 inch
 
show details
This 18 in. long, 50 ohm, RG58 coaxial cable is fitted with BNC male connectors on both ends. It connects the TDR200 to the Level 1 SDM8X50/SDMX50 in a TDR system.
ENCTDR100
ENCTDR100 16 x 18 Enclosure to Hold Datalogger, SDM8X50-N & TDR200
 
show details
The ENCTDR100 is a white fiberglass-reinforced polyester enclosure that protects the TDR equipment from weather, condensing humidity, and dust. With internal dimensions of 16" x 18" x 8", it can house the datalogger, power supply, TDR200, and SDM8X50-N.
CS605-L
CS605-L
 
CS605-L 3-Rod TDR Probe w/RG58 Cable
 
Cable Length - show details
-L Pricing is in ft cable per probe

Allowed values: 1-50 ft, increments of 1 ft

The CS605 has a standard RG58 cable that is suitable for cable lengths up to 15 meters (50 ft). The maximum length is 15 m as measured from the tips of the probe's rods to the TDR100 Reflectometer. Any cable length from the TDR100 to an SDMX50-series multiplexer should be subtracted from the cable length(s) ordered with the probe(s). A similar probe, the CS610, should be used for lengths greater than 15 m; the CS605 and CS610 differ only in their cabling.
CS610-L
CS610-L
 
CS610-L 3-Rod TDR Probe w/RG8 Cable
 
Cable Length - show details
-L Pricing is in ft cable per probe

Allowed values: 1-82 ft, increments of 1 ft

The CS610 has a low-loss RG8 cable that is suitable for cable lengths up to 25 meters (82 feet). The maximum length of 25 m is measured from the tips of the probe's rods to the reflectometer. Any cable length from the reflectometer to an SDMX50-series multiplexer should be subtracted from the cable length(s) ordered with the probe(s).
CS630-L
CS630-L
 
CS630-L 3-Rod 15cm TDR Probe w/Standard Cable
 
Cable Length - show details
-L Pricing is in ft cable per probe

Allowed values: 1-50 ft, increments of 1 ft

The CS630 has a standard RG58 cable that is suitable for cable lengths up to 15 meters (50 ft). The maximum length is 15 m as measured from the tips of the probe's rods to the TDR100 Reflectometer. Any cable length from the TDR100 to an SDMX50-series multiplexer should be subtracted from the cable length(s) ordered with the probe(s).
CS635-L
CS635-L
 
CS635-L 3-Rod 15cm TDR Probe w/Low Loss Cable
 
Cable Length - show details
-L Pricing is in ft cable per probe

Allowed values: 1-82 ft, increments of 1 ft

The CS635 has a low-loss LMR200DB cable that is suitable for cable lengths up to 25 meters (82 feet) as measured from the tips of the probe's rods to the TDR100 Reflectometer. Any cable length from the TDR100 to an SDMX50-series multiplexer should be subtracted from the cable length(s) ordered with the probe(s).
CS640-L
CS640-L
 
CS640-L 3-Rod 7.5cm TDR Probe w/Standard Cable
 
Cable Length - show details
-L Pricing is in ft cable per probe

Allowed values: 1-50 ft, increments of 1 ft

The CS640 has a standard RG58 cable that is suitable for cable lengths up to 15 meters (50 feet) as measured from the tips of the probe's rods to the TDR100 Reflectometer. Any cable length from the TDR100 to an SDMX50-series multiplexer should be subtracted from the cable length(s) ordered with the probe(s).
CS645-L
CS645-L
 
CS645-L 3-Rod 7.5cm TDR Probe w/Low Loss Cable
 
Cable Length - show details
-L Pricing is in ft cable per probe

Allowed values: 1-82 ft, increments of 1 ft

The CS645 has a low-loss LMR200DB cable that is suitable for cable lengths up to 25 meters (82 feet) as measured from the tips of probe's rods to the TDR100 Reflectometer. Any cable length from the TDR100 to an SDMX50-series multiplexer should be subtracted from the cable length(s) ordered with the probe(s).

Replacement Parts

8480
8480 5-Pin Screw Terminal Plug Connector .15 inch pitch Right Angle Wire Entry 16 -18AWG w/Threaded Flange
 
show details
This green power connector has five screw terminals. It may be purchased to replace a lost or damaged connector.
32559
32559 TDR200 or SDM8X50 to Datalogger Cables, 15 inch & 12 inch
 
show details
The 32559 provides a 15 in. cable and a 12 in. cable. These cables connect the TDR200 reflectometer to the datalogger.
27555
27555 USB 2.0 Cable Type A Male to Micro B Male, 6/6.5ft
 
show details
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.