Multiplexers / SDMX50SP
This product is no longer available and has been replaced by: SDM8X50. Some accessories, replacement parts, or services may still be available.

Common Accessories

COAXTDR-L TDR Multiplexer Cable RG8 w/2 BNC Male Connectors
This low-loss coaxial cable connects different levels of SDMX50SP or connects the Level 1 SDMX50SP to the TDR100 reflectometer.
Cable Length - show details
-L ft per TDR cable

Allowed values: 1-500 ft, increments of 1 ft

Cable length is user-specified.
CABLE5CBL-L 5-Conductor 22AWG Cable w/Drain
This cable connects the datalogger to the SDMX50. The CABLE5CBL-L is a 22 AWG, five-conductor cable with a Santoprene jacket and an aluminum Mylar shield.
CABLE5CBL-L Options - show details
-L ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options - show details
-PT -PT w/Tinned Wires
With the -PT option, the cable terminates in pigtails that connect directly to the datalogger.
-PW -PW w/Pre-Wire Connector
Choose this option if you are using this cable with a pre-wired enclosure.

Other Accessories

Replacement Parts

The cable ties are constructed from a flexible, nylon material. A connection is made by pulling the tapered end through the locking end, thus forming a loop. The free end is pulled tight to secure the cables, then trimmed back to the locking end. Once attached, the cable tie must be cut to be removed.
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.