Digital Adapters / SC-CPI
SC-CPI Datalogger Serial to CPI Interface
Temperature Ranges
-ST -ST -25 to +50C
-XT -XT -55 to +85C
Warranty Lengths - show details
-SW -SW Standard 1yr Warranty
At the time of purchase, the SC-CPI includes a standard warranty of 12 months. See our full warranty policy in the SC-CP manual for the terms and conditions of this warranty.
-XW -XW 4yr Warr Extension
Our extended warranty adds 48 months to the standard 12 month warranty, bringing the total warranty period to 60 months. The extended warranty may be purchased only at the time of original product purchase. It may NOT be "added later." Except for the increased coverage length, the same terms and conditions apply to the extended warranty as apply to the standard warranty.

Add to your Quote List

Product Details
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image
Ships With
(1) 29526 Cable, SC-CPI to Datalogger
(4) 505 Screw #6-32 x .375 Pan Phillips
(4) 6044 Grommet for #6 or 8 Screw

Common Accessories

One CPI network kit is required for each CDM network.
The 27555 connects the SC-CPI to a USB port on a computer, allowing the device to be configured.
The 28898 is a 6 in. CAT6 cable for Ethernet communications.
The 28899 is a 2 ft CAT6 cable for Ethernet communications.
The 28900 is a 10 ft CAT5 cable for Ethernet communications.
The 28901 is a 50 ft CAT5 cable for Ethernet communications.
CAT5UCBL-L CAT5e Cable Unshielded w/RJ-45 Connectors
This CAT5 cable has a user-defined length.
Cable Length - show details
-L Pricing is in ft per cable

Allowed values: 1-1000 ft, increments of 1 ft

The HUB-CPI allows eight CPI devices to be connected together in parallel. Typically, this configuration includes one datalogger and up to seven CDMs or sensors that use CPI.

Replacement Parts

The 28750 is a replacement connector for the SC-CPI.
The 29526 is the 18 in. cable used to connect the SC-CPI to a CR800, CR850, CR1000, or CR3000 datalogger.
These screws, along with the 6044 grommets, are commonly used together to secure our equipment to the backplates of our enclosures.
These grommets are commonly used with the 505 screws to secure our equipment to the backplates of our enclosures.