RETIRED ›
This product is no longer available and has been replaced by: RV50.
Product Details
Typically Ships Within 0 - 7 Days
Restockable No
Warranty 1 year
Compliance RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.


Common Accessories

14394
 
The 14394 Mounting Kit includes hardware for securing the RavenXTV to an enclosure backplate.
18663
 
The 18663 is one of three choices for connecting the modem with the datalogger. This null modem cable attaches directly to the datalogger's RS-232 port. It is the only choice available for using a RavenXTV modem with a CR200-series datalogger.
SC105
 
SC105 CS I/O to 9-Pin RS-232 DCE Synchronous Interface
 
The SC105 is one of three choices for attaching the modem to the datalogger. This interface connects the RavenXTV with the datalogger's CS I/O port. The SC105 is recommended for PakBus dataloggers.
Temperature Ranges
-ST -ST -25 to +50C
-XT -XT -55 to +85C
17855
 
The 17855 is one option for connecting the RS-232 port of a modem to the terminals on a datalogger. The 17855 provides a convenient method for wiring a DB9 connection to a terminal block. One end of the cable is fitted with a DB9 male connector. The other end of the cable has stripped and tinned leads.
31055
 
The 31055 is one option for connecting to the terminals on a datalogger. The 31055 adapts an RS-232/CPI RJ45 port to a DB9 male connector. This cable is offered to make it easier to connect a cellular modem to the RS-232/CPI port.
32256
 
A choice of four antennas is offered for the RavenXTV. The 32256 is a wide-band termination antenna with SMA connector and articulating base. It has a high-efficiency response on nearly all 4G, 3G, and 2G frequency bands. This small, low-cost antenna is typically used in applications where antenna gain is not required to maintain a strong cellular link. For a cellular product that offers both primary and diversity antenna connections, use two of these antennas.
32262
 
The 32262 is an omnidirectional antenna with mounting bracket that is ideally suited for use with 4G and 3G cellular gateways. The mounting bracket attaches to a mast or crossarm, and it serves as the antenna ground plane. The antenna has an N type (female) threaded permanent stud for easy mounting to the included bracket or through an enclosure wall.
20679
 
A choice of four antennas is offered for the RavenXTV. The 20679 is recommended for use in an area with good cell coverage. This dual-band omnidirectional antenna covers both the 800-MHz and the 1.9-GHz bands. For the 800-MHz band, the 20679 provides a 0-dBd gain. For the 1.9-GHz band, the 20679 provides a 3-dBd gain. Connection to the RavenXTV requires an antenna cable (refer to the 21847, COAXSMA-L, or COAXNTN-L listed below).
31128
 
The 31128 is a wideband Yagi directional antenna. It is uniquely suited for cellular applications because of its ability to provide gain across all of the cellular frequency bands. The antenna has a Type N Female connector and includes the mounting hardware.
21847
 
Either this cable or the COAXSMA-L (see below) is typically used with the 18285, 20679, or 10530 antennas. The 21847 has a 12-foot length. It consists of an LMR195 coaxial cable that terminates in a Type N Male connector on the "antenna end" and an SMA connector on the "transceiver end." If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Protection Kit instead of this cable.
COAXSMA-L
 
COAXSMA-L Antenna Cable LMR195 w/SMA & Type N Male Connector
 
Either this cable or the 21847 (see above) is typically used with the 18285, 20679, or 10530 antennas. The COAXSMA-L is offered for customers who want a user-specified lead length; a maximum length of 20 ft (6 m) is recommended. The COAXSMA consists of an LMR195 coaxial cable that terminates in a Type N Male connector on the "antenna end" and an SMA connector on the "transceiver end." If surge suppression or lengths longer than 20 feet are required, use the COAXNTN-L cable and 31317 Surge Protection Kit instead of this cable.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

31317
 
The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
CM230
 
The CM230 Adjustable Inclination Mount allows the 10530 Yagi antenna to be aimed at the service provider's antenna. It attaches to a mast or pipe with a 1.3" to 2.1" OD.
CM230XL
 
The CM230XL provides the same functionality as the CM230, but the CM230XL places the antenna further from the pole or crossarm.
21212
 
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.

Other Accessories

COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
The COAXNTN-L is a low-loss RG8 coaxial cable that requires the 31317 surge protection kit to connect it to the RavenXTV. The COAXNTN-L/31317 combination is recommended over the COAXSMA or 21847 when the RavenXTV is used in an environment susceptible to lightning or electrostatic buildup, or when the antenna cable must be longer than 20 feet. Please note that cable lengths longer than 20 feet should be avoided because the signal strength will be weakened.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
SC932A
 
The SC932A is one of three choices for attaching the modem to the datalogger. This interface connects the RavenXTV with the datalogger's CS I/O port. The SC932A is recommended for mixed-array dataloggers.
31315
 
Commonly used with cellular devices, the 31315 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
 
The 19334 is a factory-installed 17 in. (43.2 cm) cable with an SMA connector on the inside of an enclosure and a Type N connector on the outside for attachment of an antenna. It is intended for enclosures that will house our RF450 radio, a RavenXT-series cellular modem, or a user-supplied Freewave radio.
 
The 19336 is a factory-installed 17 in. (43.2 cm) cable attached to an SMA connector on the inside of an enclosure, providing an SMA connector on the outside for attachment of an antenna.

Replacement Parts

32399
 
The 32399 is a power cable for the RavenXTV. In the event that the original power cable becomes damaged, this cable can be ordered as a replacement.