Data Loggers / MeteoPV
Product Details
Typically Ships Within 0 - 7 Days
Restockable Yes
Warranty 1 year
Compliance CE Compliance Image RoHS Compliance Image

The "Typically Ships Within" value is an estimate of the number of calendar days within which this product is ready to ship from Campbell Scientific. Orders with more than 10 built-to-order products will likely increase the time needed to prepare the order for shipping.

To estimate how long it will take to receive an order that contains multiple products, combine the longest Ships Within value with the transit time of the shipping method you select.

Some specialized products have long Ships Within values. Because of this, you might consider submitting a separate order for these products so your other products won't be delayed.

Ships With
(1) 27555 USB 2.0 Cable, Type A Male to Micro B Male, 6/6.5 ft
(1) 8125 Flat-Bladed Screwdriver, 2.5 mm Blade x 50 mm Shaft
(1) 34163 MeteoPV Let's Go Card

Common Accessories

CS240DM
 
CS240DM PT-1000 Class A, Back of Module Temperature Sensor (-40 to +135C) w/Digital Modbus RS-485 Output
 
The CS240DM is a best-in-class smart sensor with a rugged, surface-mountable platinum resistive thermometer (PRT) that measures back-of-module temperature on solar photovoltaic (PV) panels. The CS240DM includes a new Campbell Scientific precision analog-to-digital, smart-sensor module that makes back-of-module temperature measurements that are among the most accurate measurements available today.
Standard Options
-S1 -S1 w/17ft (5m) & PT
-S2 -S2 w/50ft (15m) QC & PT
-S3 -S3 w/150ft (45m) QC & PT
-S4 -S4 Sensor Head Only w/QC
-U -U User Defined Conf
-U User Defined Config - show details
  -L ft cable per sensor

Allowed values: 1-1000 ft, increments of 1 ft

-U Cable Termination Options
  -PT -PT w/Tinned Wires
  -PW -PW w/Pre-Wire Connector
 
Temperature Calibration
-NC -NC w/No Calibration
-CC -CC w/3-Pt Calibration
MetSENS200
 
MetSENS200 Compact Weather Sensor w/Wind & Compass
 
The MetSENS200 compact weather sensor measures wind speed and direction via an ultrasonic sensor. An integrated electronic compass provides apparent wind measurements. WMO average wind speed and direction and gust data are provided. The MetSENS200 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell Scientific data logger using SDI-12, RS-485, ModbusRS-485, or NMEA RS-232.
Communication Options - show details
-D2 -D2 RS-232 Digital Output
The maximum cable length is 21 ft. When ordering the -D2 option, the -50 and -100 options are not orderable.
-DM -DM RS-485 Modbus Output
-DS -DS SDI-12 Digital Output
The maximum cable length is 300 ft.
Cable Length Options
-17 -17 w/17ft per sensor
-50 -50 w/50ft per sensor
-150 -150 w/150ft per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft cable per probe

Allowed values: 1-3000 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
METSENS300
 
METSENS300 Compact Weather Sensor w/Temperature, RH, & Barometric Pressure
 
The MetSENS300 compact weather sensor measures air temperature, relative humidity, and barometric pressure in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. Temperature, relative humidity, barometric pressure, absolute humidity, air density, and wet bulb temperature data are provided. The MetSENS300 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell Scientific data logger using SDI-12, RS-485, ModbusRS-485, or NMEA RS-232.
Communication Options - show details
-D2 -D2 RS-232 Digital Output
The maximum cable length is 21 ft. When ordering the -D2 option, the -50 and -100 options are not orderable.
-DM -DM RS-485 Modbus Output
-DS -DS SDI-12 Digital Output
The maximum cable length is 300 ft.
Cable Length Options
-17 -17 w/17ft per sensor
-50 -50 w/50ft per sensor
-150 -150 w/150ft per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft cable per probe

Allowed values: 1-3000 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
METSENS500
 
METSENS500 Compact Weather Sensor w/Temperature, RH, Barometric Pressure, Wind & Compass
 
The MetSENS500 compact weather sensor measures wind speed and direction via an ultrasonic sensor, as well as air temperature, relative humidity, and barometric pressure, in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. An integrated electronic compass provides apparent wind measurements. WMO average wind speed and direction and gust, temperature, relative humidity, barometric pressure, absolute humidity, air density, and wet bulb temperature data are provided. The MetSENS500 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell Scientific data logger using SDI-12, RS-485, ModbusRS-485, or NMEA RS-232.
Communication Options - show details
-D2 -D2 RS-232 Digital Output
The maximum cable length is 21 ft. When ordering the -D2 option, the -50 and -100 options are not orderable.
-DM -DM RS-485 Modbus Output
-DS -DS SDI-12 Digital Output
The maximum cable length is 300 ft.
Cable Length Options
-17 -17 w/17ft per sensor
-50 -50 w/50ft per sensor
-150 -150 w/150ft per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft cable per probe

Allowed values: 1-3000 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
METSENS550
 
METSENS550 Compact Weather Sensor w/Temperature, RH, Barometric Pressure, Wind, Compass & a Precipitation Connector
 
The MetSENS550 compact weather sensor measures wind speed and direction via an ultrasonic sensor, as well as air temperature, relative humidity, and barometric pressure, in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. An integrated side connector allows users to connect a tipping bucket rain gauge. An integrated electronic compass provides apparent wind measurements. WMO average wind speed and direction and gust, temperature, relative humidity, barometric pressure, absolute humidity, air density, wet bulb temperature, rainfall total, and rainfall intensity data are provided. The MetSENS550 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell Scientific data logger using SDI-12, RS-485, ModbusRS-485, or NMEA RS-232.
Communication Options - show details
-D2 -D2 RS-232 Digital Output
The maximum cable length is 21 ft. When ordering the -D2 option, the -50 and -100 options are not orderable.
-DM -DM RS-485 Modbus Output
-DS -DS SDI-12 Digital Output
The maximum cable length is 300 ft.
Cable Length Options
-17 -17 w/17ft per sensor
-50 -50 w/50ft per sensor
-150 -150 w/150ft per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft cable per probe

Allowed values: 1-3000 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
METSENS600
 
METSENS600 Compact Weather Sensor w/Temperature, RH, Barometric Pressure, Wind, Compass, & Precipitation
 
The MetSENS600 compact weather sensor measures wind speed and direction via an ultrasonic sensor, as well as air temperature, relative humidity, and barometric pressure, in a single, combined instrument mounted inside three double-louvered, naturally aspirated radiation shields with no moving parts. An optical precipitation sensing element senses fine amounts of water. An integrated electronic compass provides apparent wind measurements. WMO average wind speed and direction and gust, temperature, relative humidity, barometric pressure, absolute humidity, air density, wet bulb temperature, rainfall total, and rainfall intensity data are provided. The MetSENS600 is compatible and easily integrated with the MeteoPV Solar Resource Platform and any Campbell Scientific data logger using SDI-12, RS-485, ModbusRS-485, or NMEA RS-232.
Communication Options - show details
-D2 -D2 RS-232 Digital Output
The maximum cable length is 21 ft. When ordering the -D2 option, the -50 and -100 options are not orderable.
-DM -DM RS-485 Modbus Output
-DS -DS SDI-12 Digital Output
The maximum cable length is 300 ft.
Cable Length Options
-17 -17 w/17ft per sensor
-50 -50 w/50ft per sensor
-150 -150 w/150ft per sensor
-U -U w/User Defined Length
-U User Specified Length - show details
  -L ft cable per probe

Allowed values: 1-3000 ft, increments of 1 ft

 
Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
PWENC12/14
 
PWENC12/14 Pre-Wired Weather- Resistant 12 x 14 inch Enclosure
 
This is one of two enclosure options. The PWENC12/14 is a prewired, weather-resistant enclosure that is 12 inches wide and 14 inches tall.
PWENC12/14 Options - show details
-C Connectors per ENC

Allowed values: 1-8 ea, increments of 1 ea

After the -C, enter the number of connectors you need. The PWENC12/14 can have up to eight connectors.
Communication Ports - show details
-NP -NP No 9-Pin Ports
Choose this option if you do not want any 9-pin ports nor an Ethernet port on the outside of your enclosure.
-1P -1P One 9-Pin Port
Choose this option if you want one 9-pin port for connecting communication equipment to the outside of the enclosure. It can be configured as a CS I/O port or RS-232 port. The port will be on the bottom right of the connector panel.
-2P -2P Two 9-Pin Ports
With this option, you get a CS I/O port and an RS-232 port on the outside of the enclosure. The ports will be on the bottom right of the connector panel.
-EP -EP Ethernet Port
This option allows you to connect an Ethernet cable to the enclosure. The Ethernet port will be on the bottom right of the connector panel.
Conduit Option - show details
-NC -NC No Conduit
Choose the -NC option if you do not want to route any of your cables through a conduit.
-SC -SC 1 Conduit
The -SC option provides one 1.5-in diameter conduit on bottom left of connector panel. Multiple cables can be routed through this conduit. The 7363 enclosure supply kit contains a plug that can reduce the conduit's internal diameter to 0.5" and putty for sealing the conduit.
Cable Entry Seal Options - show details
-NE -NE No Cable Entry Seal
Choose the -NE option if you do not want to route any of your cables through a cable-entry seal.
-SE -SE Sm Cable Entry Seal
This option orders one small cable-entry seal that fits a cable with a 0.118" to 0.275" (3 to 7 mm) diameter. The cable entry seal will be on the top left of the connector panel.
-ME -ME Med Cable Entry Seal
This option orders one medium cable entry seal that fits a cable with a 0.231" to 0.394" (5.8 to 10 mm) diameter. The cable entry seal will be on the top left of the connector panel.
Enclosure Mounts - show details
-NM -NM No Enclosure Mounting
With this option, the enclosure is shipped without brackets. Customers who will bolt their enclosure to a flat surface should choose the -NM option. The no bracket option might also be appropriate for applications in which the enclosure will be set on a table.
-MM -MM Tripod Mast Mounting
Order the "-MM" option if you want to mount your enclosure to the mast of one of our tripods or to a user-supplied pole with a 1.25" to 2.1" OD. A three-piece, stainless-steel bracket attaches to the top of the enclosure and an identical three-piece, stainless-steel bracket attaches to the bottom of the enclosure. Each bracket is attached to the mast or pole via a 2" u-bolt.
-LM -LM CM1xx Leg Mounting
The "-LM" option allows the enclosure to be attached to the leg base of a CM106, CM110, CM115, or CM120 tripod. This option includes a metal flange, two stainless-steel brackets, and a 2.5" u-bolt. The brackets attach to the right and left side of the enclosure, and the flange attaches to the tripod near the mast. The flange fits into a notch in one of the brackets, and the other bracket connects to a tripod leg via the u-bolt.
-TM -TM Tower Mounting
Order the "-TM" option if you want to mount your enclosure to a UT10, UT20, or UT30 tower. This mounting bracket option uses the same 3-piece, stainless-steel brackets as the "-MM" option, except the pieces are rearranged so that the flanges are on the side of the bracket instead of in the middle. Four 1.5" u-bolts attach the brackets to the tower legs.

Please note that enclosures with the "-TM" option are shipped configured for the UT10 tower. UT20 and UT30 customers will need to: (1) remove the bolts attaching the bracket to the enclosure, (2) slide out the flange sections so that the distance between the center of each flange is 17", and (3) reattach the bracket to the enclosure using the original bolts.
-PM -PM Pole Mounting, 4-10in
Choose the "-PM" option to mount the enclosure on a pole with a 4" to 10" OD. This option includes two stainless-steel brackets and two metal bands. One bracket is attached to the top of the enclosure and the other bracket is attached to the bottom of the enclosure. The metal bands are then routed through the brackets and wrapped around the pole. Screw clamps at the end of each band are used to tighten the bands around the pole.
-EM -EM ET Pole Mounting, 3in
Choose the "-EM" option to mount the enclosure on a pole with a 3" OD. This option uses strut clamps and a hangar bracket.
PWENC16/18
 
PWENC16/18 Pre-Wired Weather- Resistant 16 x 18 inch Enclosure
 
This is one of two enclosure options. The PWENC16/18 is a prewired, weather-resistant enclosure that is 16 in. wide and 18 in. tall.
PWENC16/18 Options - show details
-C Connectors per ENC

Allowed values: 1-19 ea, increments of 1 ea

After the -C, enter the number of connectors you need. The PWENC16/18 can have up to 19 connectors.
Communication Ports - show details
-NP -NP No 9-Pin Ports
Choose this option if you do not want any 9-pin ports nor an Ethernet port on the outside of your enclosure.
-1P -1P One 9-Pin Port
Choose this option if you want one 9-pin port for connecting communication equipment to the outside of the enclosure. The 9-pin port can be configured as a CS I/O port or RS-232 port. The port will be on the bottom right of the connector panel.
-2P -2P Two 9-Pin Ports
With this option, you get a CS I/O port and an RS-232 port on the outside of the enclosure. The ports will be on the bottom right of the connector panel.
-EP -EP Ethernet Port
This option allows you to connect an Ethernet cable to the enclosure. The Ethernet port will be on the bottom right of the connector panel.
Conduit Option - show details
-NC -NC No Conduit
Choose the -NC option if you do not want to route any of your cables through a conduit.
-SC -SC 1 Conduit
The -SC option provides one 1.5-in diameter conduit on the bottom left of connector panel. Multiple cables can be routed through this conduit. The 7363 enclosure supply kit contains a plug that can reduce the conduit's internal diameter to 0.5" and putty for sealing the conduit.
Cable Entry Seal Options - show details
-NE -NE No Cable Entry Seal
Choose the -NE option if you do not want to route a cable through a cable-entry seal.
-SE -SE Sm Cable Entry Seal
This option orders one small cable-entry seal that fits a cable with a 0.118" to 0.275" (3 to 7 mm) diameter. The cable entry seal will be on the top left of the connector panel.
-ME -ME Med Cable Entry Seal
This option orders one medium cable-entry seal that fits a cable with a 0.231" to 0.394" (5.8 to 10 mm) diameter. The cable entry seal will be on the top left of the connector panel.
Backplate Options - show details
-SB -SB Standard Backplate
The -SB option provides a backplate that is prepunched with one-inch-on-center holes for mounting equipment. This mounting scheme simplifies system configuration and facilitates addition and removal of equipment in the field.
-EL -EL Backplate w/Left Side
With this option, the side plate is mounted on the left side of the enclosure. Both the backplate and the sideplate include a grid of one-inch-on-center holes for mounting devices.
-ER -ER Backplate w/RightSide
With this option, the side plate is mounted on the right side of the enclosure. Both the backplate and the sideplate include a grid of one-inch-on-center holes for mounting devices.
Enclosure Mounts - show details
-NM -NM No Enclosure Mounting
With this option, the enclosure is shipped without brackets. Customers who will bolt their enclosure to a flat surface should choose the -NM option. The no bracket option might also be appropriate for applications in which the enclosure will be set on a table.
-MM -MM Tripod Mast Mounting
Order the "-MM" option if you want to mount your enclosure to the mast of one of our tripods or to a user-supplied pole with a 1.25" to 2.1" OD. A three-piece, stainless-steel bracket attaches to the top of the enclosure and an identical three-piece, stainless-steel bracket attaches to the bottom of the enclosure. Each bracket is attached to the mast or pole via a 2" U-bolt.
-LM -LM CM106 Leg Mounting
The "-LM" option allows the enclosure to be attached to the leg base of a CM106 tripod. This option includes a metal flange, two stainless-steel brackets, and a 2.5" U-bolt. The brackets attach to the right and left side of the enclosure, and the flange attaches to the tripod near the mast. The flange fits into a notch in one of the brackets, and the other bracket connects to a tripod leg via the U-bolt.
-TM -TM Tower Mounting
Order the "-TM" option if you want to mount your enclosure to a UT10, UT20, or UT30 tower. This mounting bracket option uses the same 3-piece, stainless-steel brackets as the "-MM" option, except the pieces are rearranged so that the flanges are on the side of the bracket instead of in the middle. Four 1.5" U-bolts attach the brackets to the tower legs.

Please note that enclosures with the "-TM" option are shipped configured for the UT10 tower. UT20 and UT30 customers will need to: (1) remove the bolts attaching the bracket to the enclosure, (2) slide out the flange sections so that the distance between the center of each flange is 17", and (3) reattach the bracket to the enclosure using the original bolts.
-PM -PM Pole Mounting, 4-10in
Choose the "-PM" option to mount the enclosure on a pole with a 4" to 10" OD. This option includes two stainless-steel brackets and two metal bands. One bracket is attached to the top of the enclosure and the other bracket is attached to the bottom of the enclosure. The metal bands are then routed through the brackets and wrapped around the pole. Screw clamps at the end of each band are used to tighten the bands around the pole.
MS-80M-L
 
MS-80M-L EKO ISO 9060 Secondary Standard Pyranometer w/RS-485 Modbus Communications
 
The MS-80M is an innovative, next-generation secondary standard pyranometer inspired by the combination of latest technologies and state-of-the-art thermopile sensor with an unprecedented, low zero-offset behavior; fast sensor response; Modbus RTU 485 output; and a five-year warranty and recalibration interval.
MS-80M Options - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector
SR20-D2-L
 
SR20-D2-L Hukseflux Digital Secondary Standard Pyranometer w/10K Thermistor
 
The SR20-D2 is an ISO 9060 digital secondary standard pyranometer that measures solar short-wave radiation in a full hemisphere of the sky. It connects directly to a Campbell Scientific data logger and is designed for Modbus RTU applications that require high measurement accuracy in demanding applications such as scientific meteorological observation networks and utility scale solar-energy-power production sites.
SR20-D2-L Options - show details
-L ft cable per sensor

Allowed values: 1-1000 ft, increments of 1 ft

Cable Termination Options
-PT -PT w/Tinned Wires
-PW -PW w/Pre-Wire Connector

Other Accessories

TE525METS-L
 
TE525METS-L Texas Electronics Rain Gage 0.01 inch (0.254mm) Tip w/6 inch Orifice For Use with METSENS550
 
The TE525METS-L has a 6 in. orifice and measures rainfall in 0.01 in. increments. It is compatible with all Campbell Scientific data loggers, and it is widely used in environmental monitoring applications. This rain gage has a special connector for attachment to the MetSENS550.
TE525METS-L Options - show details
-L ft cable per sensor

Allowed values: 0-1000 ft, increments of 1 ft

Replacement Parts

15598
 
The 15598 needs to be periodically replaced. Campbell Scientific recommends replacing the battery every five years.
27555
 
The 27555 is a USB Type A to Micro B, male-to-male cable, 6 to 6.5 ft long. It connects devices using the Micro B interface to a USB port on a computer.
8125
 
The 8125 is a small, flat-bladed screwdriver that is extremely useful for opening the guillotine terminals on our data loggers and measurement control devices.