RETIRED ›
This product is no longer available and has been replaced by: RV50. Some accessories, replacement parts, or services may still be available.

Common Accessories

30988
 
The mounting kit provides a convenient method to mount the LS300G to the backplate of a Campbell Scientific enclosure.
18663
 
The 18663 is one method to connect the modem with the datalogger. This null modem cable attaches directly to the datalogger's RS-232 port.
SC105
 
SC105 CS I/O to 9-Pin RS-232 DCE Synchronous Interface
 
The SC105 is one method to attach the modem to the datalogger. This interface connects the modem with the datalogger's CS I/O port.
Temperature Ranges - show details
-ST -ST -25 to +50C
Standard Temperature Testing range is -25° to +50°C. Individual units are warranted to perform within published specifications over this range, which is included with product purchase.
-XT -XT -55 to +85C
Extended Temperature Testing over the -55° to +85°C range is also available. Individual units are subjected to performance tests at these extremes in a test chamber. Units that pass the tests are certified as extended temperature units.

Please note that manual operation of the "Program" button in SC105s may be compromised at extended low temperatures (-25° to -55°C). The program button is used only when configuration settings are being manually downloaded to the device from a computer.
20679
 
The 20679 is recommended for locations where cellular coverage is strong. This dual-band omnidirectional antenna covers both the 800 MHz and the 1.9 GHz bands. For the 800 MHz band, the 20679 provides a 0 dBd gain. For the 1.9 GHz band, the 20679 provides a 3 dBd gain.
31128
 
The 31128 is a wideband Yagi directional antenna. It is uniquely suited for cellular applications because of its ability to provide gain across all of the cellular frequency bands. The antenna has a Type N Female connector and includes the mounting hardware.
21847
 
The 21847 has a 12-foot length. It consists of an LMR195 coaxial cable that terminates in a Type N Male connector on the "antenna end" and an SMA connector on the "transceiver end." If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Protection Kit instead of this cable.
COAXSMA-L
 
COAXSMA-L Antenna Cable LMR195 w/SMA & Type N Male Connector
 
The COAXSMA-L is a LMR195 coax cable terminated with a Type N male connector on one end (antenna) and a SMA male connector on the other (cellular gateway). It is custom ordered to length. If surge suppression is required, use the COAXNTN-L cable and 31317 Surge Protection Kit instead of this cable.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-1000 ft, increments of 1 ft

COAXNTN-L
 
COAXNTN-L Antenna Cable RG8 w/2 Type N Male Connectors
 
The COAXNTN-L is a low-loss RG8 coaxial cable. The COAXNTN-L/31317 combination is recommended over the COAXSMA or 21847 when a modem is used in an environment susceptible to lightning or electrostatic buildup.
Cable Length - show details
-L ft per antenna cable

Allowed values: 1-500 ft, increments of 1 ft

Recommended length is 15, 25, or 35 ft (4.6, 7.7, or 10.8 m).
31317
 
The 31317 is an RF surge protection kit with flange mounting bracket. It may be flange-mounted to an enclosure backplate or bulkhead-mounted through an enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
CM230
 
The CM230 Adjustable Inclination Mount allows the antenna to be aimed at the service provider's antenna. It attaches to a mast or pipe with a 1.3" to 2.1" OD.
CM230XL
 
The CM230XL provides the same functionality as the CM230, but the CM230XL places the antenna further from the pole or crossarm.
21212
 
This 10 ft (3.1 m) roll of 1"-wide black self-vulcanizing tape can help protect the connection of outdoor antennas. After connecting the coaxial cable to the antenna, wrap the tape around the connectors that are exposed to the environment.

Other Accessories

28899
 
Can only be used to connect to CR6 or datalogger with NL device.^Used to connect to PC for configuration via RJ45 port.
31182
 
The 31182 is a magnetic mount GPS patch antenna. It is typically used where GPS reception is readily available and concern is low for snow buildup completely covering the antenna. The 31182 is also commonly used in cost-sensitive applications or applications that require a small-sized, low-profile antenna. This antenna connects to a GPS receiver with SMA connector, such as that found in the LS300G. The antenna package is waterproof and corrosion resistant.
31315
 
Commonly used with cellular devices, the 31315 is an RF surge protection kit that is installed by Campbell Scientific, bulkhead-mounted through the enclosure wall. One side of the surge protector connects to a radio with an SMA antenna connection. The other side connects to an antenna/antenna coaxial cable with Type N connector.
 
The 19334 is a factory-installed 17 in. (43.2 cm) cable with an SMA connector on the inside of an enclosure and a Type N connector on the outside for attachment of an antenna.
 
The 19336 is a factory-installed 17 in. (43.2 cm) cable attached to an SMA connector on the inside of an enclosure, providing an SMA connector on the outside for attachment of an antenna.

Replacement Parts

31098
 
The 31098 is a 5 ft, unshielded CAT6 network cable with RJ45 connectors. It is typically used to connect a PC or one of our many Ethernet-capable products to an Ethernet device or network connection.
32399
 
The 32399 is a power cable for the LS300G. In the event that the original power cable becomes damaged, this cable can be ordered as a replacement.